📶Imei/F4 F4 p20 eml-l09 android 10 octoplus huawei.!!!

[Draxter2.0]

Conectar en tp y listo...

Welcome to Octoplus Huawei Software v.‪1.2.0‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'


Found COM ports:
1: COM5 USB Serial Port
2: COM6 HUAWEI USB COM 1.0

2020-08-17 21:18:10 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪EML-L09‬
Searching HUAWEI USB COM 1.0 port...
Updating bootloader KIRIN970_A8.1_V0..
Initializing remote service connection
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪EXPLOIT‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...

Device Model: ‪EML-L09‬
System: ‪EML-L09 10.0.0.161(C605E3R1P3)‬
MEID: ‪A00000919B1CC8‬
IMEI A: ‪000000000000000‬
IMEI B: ‪000000000000000‬
S/N: ‪BPN02186100009‬

Connect done.
Performed by ‪1.2.0‬ Software version.

2020-08-17 21:19:27 GMT -------------------------------------------------
Starting Repair Info
New IMEI A: ‪867129037271938‬
New IMEI B: ‪867129037271938‬
Saving backup of MODEM_SECURE...
Saving backup of OEMINFO...
Saving backup of MODEMNVM_FACTORY...
Saving backup of MODEMNVM_SYSTEM...
Saving backup of MODEMNVM_IMG...

Reading info from OEMINFO...
OEMINFO Phone Model: EML-L09
OEMINFO IMEI_A: 000000000000000
OEMINFO IMEI_B: 000000000000000
OEMINFO MEID: A00000919B1CC8
OEMINFO Build Number: EML-L09 9.0.0.161(C605E2R1P11)
OEMINFO Vendor: hw
OEMINFO Country: la

Reading info from NV...
NV IMEI_A: 000000000000000
NV IMEI_B: 000000000000000
Connecting to server...
Repairing...
Writing MODEM_SECURE partition...
Writing OEMINFO partition...
Writing MODEMNVM_FACTORY partition...
Writing MODEMNVM_SYSTEM partition...
Writing MODEMNVM_IMG partition...

Repair Info done.
Performed by ‪1.2.0‬ Software version.

 

[supapg16]

Con este método, después se puede actualizar manualmente el software sin perder la reparación de f4 o es solo un parche?

 

[Draxter2.0]

Con este método, después se puede actualizar manualmente el software sin perder la reparación de f4 o es solo un parche?

si pones imei del mismo modelo si