frp Altice Starnaute 4

[servergsm]

buenas despues de darle a este telefono y no lograr nada aqui esta la solucion
abrir NCK AndroidMTK 1.8.87

elegir el modelo starnaute 4 en la pestaña Altice

ir a la barra FRP-Pattern-PRIVACY
le dan [FM]Reset FRP
con el telefono apagado presionan volumen + y Volumen -
y lo conectan y listo no mas FRP aqui el LOG

Exe version: NCKBox AndroidMTK 1.8.8.7
Selected model: Starnaute 4
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM62)
Boot mode: Brom
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A48384734 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM28)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.