Frp Blu Grand M2 G190m Nck

[servergsm]

hola compañeros les dejo como saque este modelo para quitar cuenta
utilice la versión 2.5.8.7 de NCK Dongle
seleccionamos MT6580
luego reset FRP
se conecta apagado presionando el botón de volumen menos.

Exe version: NCKDongle AndroidMTK 2.5.8.7
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM19)
Boot mode: Brom
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 484a01906134473862
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.

nota si da error

!)cargar el firmware del equipo, para realizar el proceso (load scatter and preloader from phone fimware)
2)luego con el firmware cargado, reset frp
3)conecta apagado mas vol -

[IMPORTANT]aqui el logs del error:
[/IMPORTANT]
Exe version: NCKDongle AndroidMTK 2.5.9.0
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM96)
Boot mode: Brom
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 514e011335394a3277
Error Load Custom EMMI.
BBCHIP MT6580
flash id: 514E011335394A3277
[S_FT_ENABLE_DRAM_FAIL]Exe not support this emmi settings
Please load scatter and preloader from phone fimware
Boot Fail.!!!.

logs solucionado:

Exe version: NCKDongle AndroidMTK 2.5.9.0
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM39)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e4a325a4d42
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 1501004E4A325A4D42 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.​

 

[mixmix18]

bro y el firmware en caso de error podrias subirlo porfa?