Offline
Solo sigan los siguientes pasos y saldrá de una
1. Abren modulo CM2SPD v1.27
2. Ir a la pestaña settings
3. Click en CPU y seleccionan: SP [SC983x] eMMC [Generic Android 7.x]
4. Ir a la pestaña service
5. Click en Read in Boot y luego Check/Info
6. Con el celular apagado, presionan vol+ y lo conectan
7. Una vez finalizado, desconectan el telefono y click en Format FS / Reset Phone / Clear FRP
Con eso ya quedará sin cuenta. Espero les sirva!
Aquí .log
Card found: S/N : BA1xxxxx , v0136
Chinese Miracle II [SPD module] v 1.27
Set mode to : SP [SC983x] eMMC [Generic Android 7.x]
Operation : Check/Read Info [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : AX1016
Model Brand : Bmobile
Model Device: Bmobile_AX1016
AndrVersion : 7.0
BaseBand CPU: AX1016
CompileDate : 9/1/2018 8:53:56 a. m.
Project Ver : Bmobile_AX1016_TIGO_LAT_V009
Model Ext : AX1016
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:33
Reconnect Power/Cable!
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
eMMC phone detected! Will use 'Safe Format' mode!
Mount : /data
Size : 0x0000000141FF7000
State : 0x0001
Mount : /cache
Size : 0x0000000009600000
State : 0x0001
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
Android 5.x/6.x : Reset FRP Lock
Reset Ok!
Done!
Elapsed: 00:00:32
Reconnect Power/Cable![/Info][/Info]
1. Abren modulo CM2SPD v1.27
2. Ir a la pestaña settings
3. Click en CPU y seleccionan: SP [SC983x] eMMC [Generic Android 7.x]
4. Ir a la pestaña service
5. Click en Read in Boot y luego Check/Info
6. Con el celular apagado, presionan vol+ y lo conectan
7. Una vez finalizado, desconectan el telefono y click en Format FS / Reset Phone / Clear FRP
Con eso ya quedará sin cuenta. Espero les sirva!
Aquí .log
Card found: S/N : BA1xxxxx , v0136
Chinese Miracle II [SPD module] v 1.27
Set mode to : SP [SC983x] eMMC [Generic Android 7.x]
Operation : Check/Read Info [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : AX1016
Model Brand : Bmobile
Model Device: Bmobile_AX1016
AndrVersion : 7.0
BaseBand CPU: AX1016
CompileDate : 9/1/2018 8:53:56 a. m.
Project Ver : Bmobile_AX1016_TIGO_LAT_V009
Model Ext : AX1016
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:33
Reconnect Power/Cable!
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
eMMC phone detected! Will use 'Safe Format' mode!
Mount : /data
Size : 0x0000000141FF7000
State : 0x0001
Mount : /cache
Size : 0x0000000009600000
State : 0x0001
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
Android 5.x/6.x : Reset FRP Lock
Reset Ok!
Done!
Elapsed: 00:00:32
Reconnect Power/Cable![/Info][/Info]
