🔐 Frp Cuenta Google FRP Cloud Mobile Stratus C8 Cuenta Google con Pandora Box

[servergsm]

Marca 📱

Otras Marcas

Modelo 🔖

Cloud Mobile Stratus C8

📱 Android / Sistema operativo

Android 13

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

pandora | Pandora Box

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

Eliminar Cuenta Google FRP A Cloud Mobile Stratus C8 con pandora box

Guía paso a paso para eliminar el bloqueo de cuenta Google (FRP) en el dispositivo Cloud Mobile Stratus C8 utilizando la herramienta profesional Pandora Box. Un proceso rápido y efectivo explicado de forma sencilla.

Selecionar el modelo en pandora dar en eliminar frp y limpiar conetar apagado presionando las teclas de volumen

Debes estar registrado para ver imágenes adjuntar

Selected model: Cloud Mobile Stratus C8
Operation: Erase FRP And Wipe
Software version: 9.25
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM56 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM56 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x81DBF6A6, 0x03A8AEE8, 0x843869C3, 0x41554C33
Get Chip ID... [MT6765]
Get SOC ID... [0F79887B6244FE652C68F090D7BE2806653CE1C46F323020358E8E8F85B64346]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68423861503E020F4C414D44C7
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: hB8aP>
   EMMC_ID   : 0x90014A68423861503E020F4C414D44C7
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232.00Kb)
   EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  info not available
   DeviceLifeTimeEstB:  0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand        : Cloud_Mobile
Product Manufacturer : Cloud Mobile
Product Model        : Stratus C8
Product Name         : Stratus_C8
Product Device       : Stratus_C8
Product Board        : W20_X65
Board Platform       : mt6765
Build ID             : SP1A.260309.1945
Build Date           : Mon Mar  9 22:32:38 CST 2026
Display ID           : Stratus_C8_V212
Security Patch       : 2026-03-05
Version SDK          : 33
Version Release      : 13
Version Codename     : REL
Firmware Version     : 1rck61v164bspP20
Userdata FS Type     : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Pandora/Backup/MTK/Cloud%20Mobile_Stratus%20C8/FRP_BACKUP_(2026-6-23_19-52-19)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Formatting "md_udc" partition... [P1] OK
Wipe data done!