He estado intentando desbloquear este modelo desde la tarde, usando unlocktool, chimera, tsm y no habia podido hasta que investigue el tipo de procesador que trae este Cubot MT6895 que es compatible con el MT6896.
Seleccionamos Infinix MT6895
Modo preloader V6_type_4_sec2024
Le damos Erase FRP y listo
Selected model: Infinix MT6895
Operation: Eliminar FRP
Software version: 9.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V2023 (Android),usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1172
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6895]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x8B409FD8, 0xD99877ED, 0xA2F6C275, 0xAEA6D2D4
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): MT256GAVAT4U31 ()
Send 2nd DA... OK
DA2 auth: enabled
Get device info... OK
UFS INFO:
UFS_CID : MT256GAVAT4U31
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
[EFUSE INFO]: BROM not disabled
[EFUSE INFO]: BROM SLA disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : CUBOT
Product Manufacturer : CUBOT
Product Model : KINGKONG X PRO
Product Name : KINGKONG_X_PRO_EEA
Product Device : KINGKONG_X_PRO
Product Board : CUBOT
Board Platform : common
Build ID : UP1A.231005.007
Build Date : Tue May 20 16:26:22 CST 2025
Display ID : CUBOT_KINGKONG_X_PRO_E033C_V07_20250520
Security Patch : 2025-03-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 2024190
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_MT6895/FRP_BACKUP_(2025-11-19_23-23-43)/
Format FRP... [P1] OK
Fix TOOL DL Image error... OK
Erase FRP done!
Seleccionamos Infinix MT6895
Modo preloader V6_type_4_sec2024
Le damos Erase FRP y listo
Selected model: Infinix MT6895
Operation: Eliminar FRP
Software version: 9.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V2023 (Android),usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1172
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6895]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x8B409FD8, 0xD99877ED, 0xA2F6C275, 0xAEA6D2D4
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): MT256GAVAT4U31 ()
Send 2nd DA... OK
DA2 auth: enabled
Get device info... OK
UFS INFO:
UFS_CID : MT256GAVAT4U31
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
[EFUSE INFO]: BROM not disabled
[EFUSE INFO]: BROM SLA disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : CUBOT
Product Manufacturer : CUBOT
Product Model : KINGKONG X PRO
Product Name : KINGKONG_X_PRO_EEA
Product Device : KINGKONG_X_PRO
Product Board : CUBOT
Board Platform : common
Build ID : UP1A.231005.007
Build Date : Tue May 20 16:26:22 CST 2025
Display ID : CUBOT_KINGKONG_X_PRO_E033C_V07_20250520
Security Patch : 2025-03-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 2024190
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_MT6895/FRP_BACKUP_(2025-11-19_23-23-43)/
Format FRP... [P1] OK
Fix TOOL DL Image error... OK
Erase FRP done!
Debes estar registrado para ver imágenes adjuntar
