Frp En Blu Dash M2, D090l Con Nck Box

[servergsm]

La Manera Sencilla de Hacerlo con NCK Box es:
Abrir Modulo NCK Box Android MTK
Seleccionamos Service.
Primer Pestaña Seleccionamos Blu
Segunda Pestaña Seleccionamos Blu Dash 5.5
Conecgtamos Celular Apagado al Cable USB y Listo.
Celular sin Cuenta de Google,
Dejo el Log del Proceso

Exe version: NCKBox AndroidMTK 1.8.7.2
Selected model: BLU Dash 5.5
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM17)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e4a325a4d42
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 1501004E4A325A : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM115)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.