🔐 Frp Cuenta Google Frp hisense e30 hlte220e cuenta google + imei hisense e30 hlte220e f4 con nck

[servergsm]

cuenta google Hisense E30 Hlte220e frp + f4 Hisense E30 Hlte220e imei con nck

este modelito con nck escojiendo procesador mt6763 en segundos dejo log de la operacion

Phone detected...Please wait
BBCHIP: 6763 1 ca01
Using Algo 3.
Helio MT6763 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6763
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 8F010055593543 : 000000000000000000
EMMC UA SIZE: 0x750000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x750c00000 [29.262 GB]
Modem version: MOLY.LR12A.R3.MP.V71.P4
Starting helio frp, not disconnect phone untill done
[HELIO][frp]Format partition, please wait...
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

Selected connection metod: Meta Connection
Exe version: NCKDongle AndroidMTK 2.6.5
Selected phone: MT6763
Action : IMEI REPAIR.
IMEI[1] for write : 8635XXXXXXXXXXXX
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[4]Detected: MediaTek PreLoader USB VCOM (Android) (COM4)
\\?\usb#vid_0e8d&pid_2000#5&1d961b3f&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[16]META Port Detected: MediaTek USB VCOM (Android) (COM16)
USB\VID_0E8D&PID_2007\5&1D961B3F&0&4
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6763
[AP]APP_VER: alps-mp-p0.mp7-V2.51_lentek.p0mp7.k57pv1.dm.64_P20
[mt6763]Using Algo 5
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6763
[META]SW_VER : MOLY.LR12A.R3.MP.V71.P4
[META]HW_VER : TK_MD_BASIC_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 8635xxxxxxxxxxx
Phone imei[1] : 8635xxxxxxxxxxx
Clean Boot flag ok.
[helio]Wait untill phone will start charging.
[0]All done.​

 

[RequenezHack]

tambien es posible hacerlo con octoplus frp
dejo el log
Welcome to Octoplus FRP Tool v.2.0.2.0
Card S/N: 0001365A
Work ID: 0000000001758E6C
Platform: HISENSE
Selected model: E30
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM11
Port name: SAMSUNG Mobile USB Modem
Detecting Chip Version...
HW Chip: MT6763: 0690.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Target Config: 0000
Brom Version: FF
BootLoader Version: 03
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.19
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29952 Mb
eMMC Flash: .8F010055.59354353.3010E054.A7239641
eMMC Flash: Unknown: UY5CS0
Internal RAM size: 256 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Hisense
Manufacturer: Hisense
Model: Hisense E30
Device: HS6763MT
Android version: 9
Display ID: Hisense_HLTE220E_MX02_L201.01_20200106
Searching for signatures...
Switching to high-speed success!
Resetting FRP lock..
Backup saved as Hisense_Hisense E30_28-08-2021_13-44-25.dump file
FRP lock is successfully reseted!
Performed by 2.0.2.0 Software version.