Admin
En línea
- Marca 📱
- Huawei
- Modelo 🔖
- Huawei P30 Lite (LX1M)
- 📱 Android / Sistema operativo
- Android
- Tipo de falla / servicio 🛠️
- FRP / Desbloqueos (cuentas, IMEI, red)
- 🔧Herramienta utilizada
- octoplus | Octoplus
- Estado del equipo 📋
- Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset
- ¿Problema resuelto?
- si | ✅ Resuelto
FRP Huawei P30 Lite (LX1M) Cuenta Google con Octoplus Huawei
Test point
Test point
Código:
2026-06-24 10:37:21
Starting Reset FRP
Selected phone model: MAR-LX1A
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading resource...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: SBXDU19925001909
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: MAR-LX1M
System: MAR-L21MEA 12.0.0.275(C185E2R4P1)
Android Version: 10
Base Version: MAR-LGRP2-OVS 102.0.0.275
Custom Version: MAR-L21MEA-CUST 102.0.0.2(C185)
Preload Version: MAR-L21MEA-PRELOAD 102.0.0.1(C185R4)
C_Version: C185
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: MAR-LX1M
System: MAR-L21MEA 12.0.0.275(C185E2R4P1)
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by 1.3.6 Software version.