🔐 Frp Cuenta Google FRP Huawei Y7 Prime (2018) Ldn-L21, Ldn-Lx2, Ldn-Tl10 Umt

servergsm · Hoy a las 4:54 PM

Eliminar Cuenta Google FRP A Huawei Y7 Prime (2018) LDN-L21, LDN-LX2, LDN-TL10 con UMT

test Point

Código:

Device    : Huawei Y7 Prime 2019 (LDN-L21)
Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM23)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver.    : 2
Hardware ID    : E1F00400 [8937] 41001500
OPK_DATA    : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D15110FD8B11688
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_034]...Done
Executing Loader...OK
Hardware    : 8937, DF4064 (eMMC), 64 GB
LU Count    : 3 [0x0747C000] [0x00002000] [0x00002000]
Payload Info    : [IN: 524288] [ OUT: 16384] [SafeMode:ON]
Reading Partition Table...OK [55]
Reading Device Information...OK
Device    : unknown
Software    : System 8.0.0.069(000Q), eng.root.20180813.111535 [Mon Aug 13 11:15:35 CST 2018]
Android Ver.    : 8.0.0
Patch Level    : 2018-08-01
Resetting FRP Lock........Done
Operation Finished.
QcFire Ver. 13.7

🔐 Frp Cuenta Google FRP Huawei Y7 Prime (2018) Ldn-L21, Ldn-Lx2, Ldn-Tl10 Umt

servergsm

🏆Gran Maestro

Usuarios que están viendo este hilo.

Hilos similares