Offline
abrimos NCK BOX pestaña FRP-PATTERN-PRIVACY seleccionamos procesador MT6580, conectamos apagado y listo,
me tome la molestia de leer la flash de este modelo por si alguien la necesita.
Aqui el Log
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM21)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 11:00:00:00:00:00:00:00
EMMC CID: 13014E51324A393551 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM25)
Build ID: O11019
Display ID: O11019
Version: 8.1.0
Build Date: Wed Dec 19 14:45:51 CST 2018
Model: A250
Brand: BLU
Device: A250
Manufacturer: BLU
This phone have FRP partition.
IMEI[1]: 3523181XXXXXXX
IMEI[2]: 3523181XXXXXXX
Wait untill phone will start charging.
[0]All done.
me tome la molestia de leer la flash de este modelo por si alguien la necesita.
Aqui el Log
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.9
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM21)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 11:00:00:00:00:00:00:00
EMMC CID: 13014E51324A393551 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM25)
Build ID: O11019
Display ID: O11019
Version: 8.1.0
Build Date: Wed Dec 19 14:45:51 CST 2018
Model: A250
Brand: BLU
Device: A250
Manufacturer: BLU
This phone have FRP partition.
IMEI[1]: 3523181XXXXXXX
IMEI[2]: 3523181XXXXXXX
Wait untill phone will start charging.
[0]All done.
Debes estar registrado para ver imágenes adjuntar
