Offline
cuenta google Nokia 3.1 Plus Ta-1115 frp Pandora Box
seleccionar procesador mtk
marcar use box authorization
seleccionar/ battery auto detect
storage type/ emmc
format/ auto format
format all flash
precionar eraser frp
conectar el cable al telefono apagado precionando volumen + y -
en 30 segundos fuera frp.
saludos colegas y a cobrar bien
Selected model: Mediatek Mediatek
Operation: Erase FRP
Software version: 1.7
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM134 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x4DD4F431, 0x5AF49E7A, 0x0D1451E4, 0x2C6A8542
Get Chip ID... [MT6765]
Get SOC ID... [B2D874E92CBC27B60AEB4980F5E1EE62CB6972B16FD39420770AA76FBCCFBAE1]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [29]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A484147346132A5C68A31C095F3
Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [2]
Trying EMI [BCFFEFAA, 5D40CFCF]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x90014A484147346132A5C68A31C095F3
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x03AB400000 (14,68Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read partition "frp"... OK
Format EMMC_USER partition( 0x01588000..0x01687FFF )... OK
Erase FRP done!
seleccionar procesador mtk
marcar use box authorization
seleccionar/ battery auto detect
storage type/ emmc
format/ auto format
format all flash
precionar eraser frp
conectar el cable al telefono apagado precionando volumen + y -
en 30 segundos fuera frp.
saludos colegas y a cobrar bien
Selected model: Mediatek Mediatek
Operation: Erase FRP
Software version: 1.7
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Device found at COM134 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x4DD4F431, 0x5AF49E7A, 0x0D1451E4, 0x2C6A8542
Get Chip ID... [MT6765]
Get SOC ID... [B2D874E92CBC27B60AEB4980F5E1EE62CB6972B16FD39420770AA76FBCCFBAE1]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [29]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A484147346132A5C68A31C095F3
Load EMI config from database [DB VER: 56 DB DATE: 04-11-2021] OK [2]
Trying EMI [BCFFEFAA, 5D40CFCF]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x90014A484147346132A5C68A31C095F3
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x03AB400000 (14,68Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read partition "frp"... OK
Format EMMC_USER partition( 0x01588000..0x01687FFF )... OK
Erase FRP done!
