🔐 Frp Cuenta Google FRP Nova 5t (yal-l21) Cuenta google con octoplus Huawei

[servergsm]

Marca 📱

Huawei

Modelo 🔖

Nova 5t (yal-l21)

📱 Android / Sistema operativo

Android

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

octoplus | Octoplus

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

Remover Cuenta Google FRP A Nova 5t (yal-l21) con octoplus Huawei

para esta version tiene que tener el cable especial

Debes estar registrado para ver imágenes adjuntar

​

Welcome to Octoplus Huawei Software v.‪1.3.5.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM13 HUAWEI USB COM 1.0
2: COM12 USB Serial Port

Job ID: 0000000001909E27
2026-04-08 00:08:49
Starting Reset FRP
Selected phone model: ‪YAL-L21‬
Selected method: Reset Frp (EMUI 11)
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN980_V3...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Reset FRP failed.
Performed by ‪1.3.5.5‬ Software version.

Job ID: 00000000026A2A02
2026-04-08 00:09:39
Starting Reset FRP
Selected phone model: ‪YAL-L21‬
Selected method: Reset Frp (EMUI 10)
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN980_V5...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Canceling... Please be patient!
Reset FRP canceled.
Performed by ‪1.3.5.5‬ Software version.

Job ID: 0000000001909E3D
2026-04-08 00:11:13
Starting Reset FRP
Selected phone model: ‪YAL-L21‬
Selected method: Reset Frp (EMUI 11)
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN980_V3...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Canceling... Please be patient!
Reset FRP canceled.
Performed by ‪1.3.5.5‬ Software version.

Job ID: 0000000001909E4A
2026-04-08 00:12:50
Starting Reset FRP
Selected phone model: ‪YAL-L21‬
Selected method: Reset Frp (EMUI12/Harmony)
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN980_V4...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: DU7BFS203N039032
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪YAL-L21‬
System: ‪YAL-L71 12.0.0.165(C605E6R1P2)‬
Android Version: ‪10‬
Base Version: ‪YAL-LGRP4-OVS 102.0.0.165‬
Custom Version: ‪YAL-L71-CUST 102.0.0.6(C605)‬
Preload Version: ‪YAL-L71-PRELOAD 102.0.0.2(C605R1)‬
C_Version: ‪C605‬
D_Version: ‪D1‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪YAL-L21‬
System: ‪YAL-L71 12.0.0.165(C605E6R1P2)‬
MEID: ‪00000000000000‬
IMEI A: ‪868153043655933‬
IMEI B: ‪000000000000000‬
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by ‪1.3.5.5‬ Software version.