🔐 Frp Cuenta Google FRP OPPO a7 cph1903 Cuenta google con UMT

[servergsm]

Marca 📱

Oppo / Vivo / Realme

Modelo 🔖

OPPO a7 cph1903

📱 Android / Sistema operativo

Android

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

umt | UMT Pro

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

Remover Cuenta Google FRP A OPPO a7 cph1903 con UMT
​

 OPPO a7 cph1903 factory+frp reset


Device : Oppo A7 (CPH1903)
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM192)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM192)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 74CBAEF3BA268ADE2E3358EFC3D2CA99C340596C0C7F14E283 D91F76E0EA3DFE
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_073]...Done
Executing Loader...OK
Hardware : 8953, RH64AB (eMMC), 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
Payload Info : [IN: 524288] [ OUT: 1048576] [SafeMode:ON]
Reading Partition Table...OK [63]
Reading Device Information...OK
Device : OPPO
Android Ver. : 8.1.0
Patch Level : 2021-03-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock.......Done
Operation Finished.