frp samsung g928a con uart ufs

[servergsm]

Que tal colegas acabo de eliminar una cuenta del modelo G928A BINARIO 4
CON LA OCTOPLUS

1_:SELECIONAMOS EL MODELO G9287 POR MEDIO DE (UART) CON EL CABLE 525K resistor
2_ONEMOS EL EQUIPO EN MODO DESCARGA YA QUE TE LO DETECTE SEGUIMOS LOS PASO Y LISTO EN MENOS DE 5 MINUTOS




Bienvenido en Octoplus Box Samsung software versión 2.6.3
-----------------------------------------------------------------------------------
To connect SM-G9287 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM1
Modelo seleccionado: SM-G9287
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.3 Software version.