🔐 Frp Cuenta Google FRP Samsung Galaxy A04e SM-A042M Cuenta Google bit 14 u14 Con pandora box (1 Viewer)

[servergsm]

Eliminar Cuenta Google FRP a Samsung Galaxy A04e SM-A042M binario 14 Bit B bin 14 Android 14 con pandora box

Aprende paso a paso cómo realizar el FRP (Factory Reset Protection) al Samsung Galaxy A04e (SM-A042M) con seguridad. Esta guía está actualizada específicamente para equipos con Binario 14 (Bit 14 / B14) corriendo bajo Android 14. Utilizaremos la herramienta profesional Pandora Box para un proceso efectivo mediante el modo Brom/Preloader, garantizando que el equipo quede libre de bloqueos de cuenta Google de forma permanente y sin riesgos de brickeo.

Seleccionar el modelo dar en Reset FRP O eliminar FRP y conectar Apagado dejo imagen

Debes estar registrado para ver imágenes adjuntar

​

Selected model: Samsung SM-A042M (Samsung Galaxy A04e)
Operation: Eliminar FRP
Software version: 9.14

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM110 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID =  0x3A18B1B6, 0x80C8BDB2, 0xEF0B3D05, 0xB144C7E2
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: G2C218
   EMMC_ID   : 0x13014E4732433231381029F038271ACD
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232.00Kb)
   EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  0% - 10% device life time used
   DeviceLifeTimeEstB:  0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]:  BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A042M%20(Samsung%20Galaxy%20A04e)/FRP_BACKUP_(2026-1-2_10-34-20)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!