Admin
En línea
- Marca 📱
- Samsung
- Modelo 🔖
- Samsung Galaxy A06 SM-A065M
- 📱 Android / Sistema operativo
- Android 16
- Tipo de falla / servicio 🛠️
- FRP / Desbloqueos (cuentas, IMEI, red)
- 🔧Herramienta utilizada
- pandora | Pandora Box
- Estado del equipo 📋
- Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset
- ¿Problema resuelto?
- si | ✅ Resuelto
Eliminar Cuenta Google FRP A Samsung Galaxy A06 SM-A065M Android 15-Android 16 Bit 7 u7 binario 7 con pandora
selecionar el modelo en pandora dar en reset frp conetar apagado presionando las teclas de volumen
selecionar el modelo en pandora dar en reset frp conetar apagado presionando las teclas de volumen
Debes estar registrado para ver imágenes adjuntar
Código:
10:58:43 Selected model: Samsung SM-A065M (Galaxy A06)
10:58:43 Operation: Erase FRP
10:58:43 Software version: 10.1.13
10:58:43
10:58:43 Connect phone in BROM/PRELOADER mode.
10:58:43 Waiting for device... OK
10:58:57 Device found at COM11
10:58:57 Port: USB\VID_0E8D&PID_2000\7&1F0EE770&0&3
10:58:57 Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
10:58:57 Port type: PRELOADER
10:58:57 Open port... OK
10:58:57 Send start cmd... OK
10:58:58 Get HW code... [ 0707 ]
10:58:58 Get HW & SW version from device... OK
10:58:58 HW VER: CA00 , SW VER: 0000 , HW SUB CODE: 8A00
10:58:58 Detect chip [ MT6768 ]
10:58:58 Library Version [ 2 ]
10:58:58 Select platform... OK
10:58:58 Init BROM... OK
10:58:58 Force Charge... OK
10:58:58 Disable WatchDog Timer... OK
10:58:58 Read Efuse error
10:58:58 Force switch to BROM... OK
10:58:58 Waiting for device in BROM mode... OK
10:58:59 Device found at COM8
10:58:59 Port: USB\VID_0E8D&PID_0003\7&1F0EE770&0&3
10:58:59 Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
10:58:59 Port type: BROM
10:58:59 Open port... OK
10:58:59 Send start cmd... OK
10:58:59 Get HW code... [ 0707 ]
10:58:59 Detect chip [ MT6768 ]
10:58:59 Library Version [ 2 ]
10:58:59 Init BROM... OK
10:58:59 Force Charge... OK
10:58:59 Disable WatchDog Timer... OK
10:58:59 Get sec config... [ 000000E5 ]
10:58:59 Active sec flags: [SBC DAA]
10:58:59 Release testpoint, waiting 2 seconds...
10:59:01 Advanced Bypass Security... OK
10:59:03 Waiting for device... OK
10:59:03 Device found at COM8
10:59:03 Port: USB\VID_0E8D&PID_0003\7&1F0EE770&0&3
10:59:03 Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
10:59:03 Port type: BROM
10:59:03 Open port... OK
10:59:03 Send start cmd... OK
10:59:03 Get HW code... [ 0707 ]
10:59:03 Init BROM... OK
10:59:03 Force Charge... OK
10:59:03 Disable WatchDog Timer... OK
10:59:03 Get sec config... [ 000000E0 ]
10:59:03 Read MEID... OK
10:59:03 MEID: 0BAEA9A0BE22DA570D0AF0BC74F8ACB8
10:59:03 Load DownloadAgent... OK
10:59:03 Search DA... OK [ 8 ]
10:59:03 DA file: MTK_AllInOne_DA_v2.crp
10:59:03 Send preloader... OK
10:59:03 Start preloader... OK
10:59:03 Checking preloader answer... OK
10:59:04 Send bootloader... OK
10:59:06 Start bootloader... OK
10:59:06 Wait for answer from bootloader... OK
10:59:06 Send SYNC signal... OK
10:59:06 Setup device enviroment... OK
10:59:06 Setup device parametres... OK
10:59:06 Receive DA SYNC signal... OK
10:59:06 Set DA parametres... OK
10:59:06 Get device connection agent... [BROM]
10:59:06 Read phone IDs before RAM init...
10:59:06 Chip ID: 0x0707008A00CA000001000000
10:59:06 HW/SW: HW 0x0707, SUB 0x8A00, HW_VER 0xCA00, SW_VER 0x0000
10:59:06 Storage: EMMC
10:59:06 EMMC ID: 0x150100444336444D42009820F2B8CBD7
10:59:06 EMMC FW: 0x0000000000000000
10:59:06 Load EMI from phone... OK
10:59:06 Parse EMI config... OK
10:59:06 Preloader: preloader_o8.bin
10:59:06 BLoader: v40 (sub 9)
10:59:06 EMI data: 0x000004D0
10:59:06 Initialize external RAM... OK
10:59:08 Load DownloadAgent... OK
10:59:08 Search DA... OK [ 8 ]
10:59:08 Send 2nd DA... OK
10:59:08 [EFUSE INFO]: BROM not disabled
10:59:08 Read HRID... OK [16 bytes]
10:59:08 Get device info... OK
10:59:08 EMMC INFO:
10:59:08 EMMC_CNAME: DC6DMB
10:59:08 EMMC_ID: 0x150100444336444D42009820F2B8CBD7
10:59:08 EMMC_BOOT1: 0x0000400000 ( 4.00Mb )
10:59:08 EMMC_BOOT2: 0x0000400000 ( 4.00Mb )
10:59:08 EMMC_RPMB : 0x0001000000 ( 16.00Mb )
10:59:08 EMMC_USER : 0x0E8F800000 ( 58.24Gb )
10:59:08 RAM INFO:
10:59:08 INT_SRAM : 0x0000070000 ( 448.00Kb )
10:59:08 EXT_RAM : 0x0100000000 ( 4.00Gb )
10:59:08 EXT_CSD:
10:59:08 EXT_CSD_REV: 0x08
10:59:08 USER_WP: 0x00
10:59:08 BOOT_WP: 0x00
10:59:08 BOOT_WP_STATUS: 0x00
10:59:08 HEALTH:
10:59:08 Pre EOL Info: normal
10:59:08 DeviceLifeTimeEstA: 0% - 10% device life time used
10:59:08 DeviceLifeTimeEstB: 0% - 10% device life time used
10:59:08 WRITE PROTECT:
10:59:08 OTP WP: skip (STATUS_UNSUPPORT_CMD)
10:59:08 Checking USB status... USB_HIGH_SPEED
10:59:09 Read partitions info from phone... OK
10:59:09 Checking A/B state... OK
10:59:09 Read product info... [EROFS] ... OK
10:59:09 Product Brand: samsung
10:59:09 Product Manufacturer: samsung
10:59:09 Product Model: SM-A065M
10:59:09 Product Name: a06ub
10:59:09 Product Device: a06
10:59:09 Product Board: a06
10:59:09 Board Platform: mt6768
10:59:09 Build ID: BP2A.250605.031.A3
10:59:09 Build Date: Sat Oct 18 08:04:40 KST 2025
10:59:09 Display ID: BP2A.250605.031.A3.A065MUBU7CYJ8
10:59:09 Security Patch: 2025-09-01
10:59:09 Version SDK: 36
10:59:09 Version Release: 16
10:59:09 Version Codename: REL
10:59:09 Firmware Version: A065MUBU7CYJ8
10:59:09 ODM Build ID: AP3A.240905.015.A2
10:59:09 Backup [frp.bin]... OK
10:59:09 Backup [persistent.bin]... OK
10:59:09 Saved to C:\Users\Sucre Vladimir\Desktop\Nueva carpeta\MTK\Samsung_SM-A065M (Galaxy A06)\Erase FRP_2026-08-17_10-59-09\
10:59:09 Formatting "frp" partition... OK
10:59:09 Formatting "persistent" partition... OK
10:59:09 Writting FRP data... OK
10:59:10 Reboot device... OK
10:59:10 Operation completed
Archivos adjuntos
Debes estar registrado para ver la lista de archivos adjuntos.