🔐 Frp Cuenta Google FRP Samsung Galaxy A13 5g (Sm-A136u) Bit 7 U7 Binario 7 con Pandora

[servergsm]

Marca 📱

Samsung

Modelo 🔖

Samsung Galaxy A13 5G (SM-A136U)

📱 Android / Sistema operativo

Android

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

pandora | Pandora Box

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

Eliminar Cuenta Google FRP A Samsung Galaxy A13 5G (SM-A136U) bit 7 u7 Binario 7 con pandora

se necesita Test Point

FRP ECHO

Debes estar registrado para ver imágenes adjuntar

​

19:09:52  Selected model:         Samsung SM-A136U (Samsung Galaxy A13 5G)
19:09:52  Operation:              Erase FRP
19:09:52  Software version:       10.2.20
19:09:52   
19:09:52  Connect phone in BROM/PRELOADER mode.
19:09:52  Waiting for device... OK
19:10:43  Device found at COM22
19:10:43  Port:                   USB\VID_0E8D&PID_0003\7&1F0EE770&0&3
19:10:43  Driver:                 [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
19:10:43  Port type:              BROM
19:10:43  Open port... OK
19:10:43  Send start cmd... OK
19:10:43  Get HW code...          [0989]
19:10:43  Get HW & SW version from device... OK
19:10:43  HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
19:10:43  Detect chip             [MT6833]
19:10:43  Library Version         [2]
19:10:43  Select platform... OK
19:10:43  Init BROM... OK
19:10:43  Force Charge... OK
19:10:43  Disable WatchDog Timer... OK
19:10:43  Get sec config...       [000000E5]
19:10:43  Active sec flags:       [SBC DAA]
19:10:43  Release testpoint, waiting 2 seconds...
19:10:45  Advanced Bypass Security... OK
19:10:45  Waiting for device... OK
19:10:45  Device found at COM22
19:10:45  Port:                   USB\VID_0E8D&PID_0003\7&1F0EE770&0&3
19:10:45  Driver:                 [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
19:10:45  Port type:              BROM
19:10:45  Open port... OK
19:10:45  Send start cmd... OK
19:10:45  Get HW code...          [0989]
19:10:45  Init BROM... OK
19:10:45  Force Charge... OK
19:10:45  Disable WatchDog Timer... OK
19:10:46  Get sec config...       [000000E0]
19:10:46  Read MEID... OK
19:10:46  MEID: 55496AB3F18A0F67DE5BACC7839CB19E
19:10:46  Load DownloadAgent... OK
19:10:46  Search DA... OK [14]
19:10:46  DA file: MTK_AllInOne_DA_v2.crp
19:10:46  Send preloader... OK
19:10:46  Start preloader... OK
19:10:46  Checking preloader answer... OK
19:10:47  Send bootloader... OK
19:10:50  Start bootloader... OK
19:10:50  Wait for answer from bootloader... OK
19:10:50  Send SYNC signal... OK
19:10:50  Setup device enviroment... OK
19:10:50  Setup device parametres... OK
19:10:50  Receive DA SYNC signal... OK
19:10:50  Set DA parametres... OK
19:10:50  Get device connection agent... [BROM]
19:10:50  Read phone IDs before RAM init...
19:10:50     Chip ID:             0x8909008A00CA000001000000
19:10:50     HW/SW:               HW 0x0989, SUB 0x8A00, HW_VER 0xCA00, SW_VER 0x0000
19:10:50     Storage:             EMMC
19:10:50     EMMC ID:             0x150100444336444D4200B75ACC3079EB
19:10:50     EMMC FW:             0x0000000000000000
19:10:50  Load EMI from phone... OK
19:10:50  Parse EMI config... OK
19:10:50     Preloader:           preloader_k6833v1_64_titan_hinterwald.bin
19:10:50     BLoader:             v52 (sub 9)
19:10:50     EMI data:            0x0000055C
19:10:50  Initialize external RAM... OK
19:10:52  Load DownloadAgent... OK
19:10:52  Search DA... OK [14]
19:10:52  Send 2nd DA... OK
19:10:54  [EFUSE INFO]:  BROM not disabled
19:10:54  Get device info... OK
19:10:54  EMMC INFO:
19:10:54     EMMC_CNAME: DC6DMB
19:10:54     EMMC_ID: 0x150100444336444D4200B75ACC3079EB
19:10:54     EMMC_BOOT1:          0x0000400000 ( 4.00Mb )
19:10:54     EMMC_BOOT2:          0x0000400000 ( 4.00Mb )
19:10:54     EMMC_RPMB :          0x0001000000 ( 16.00Mb )
19:10:54     EMMC_USER :          0x0E8F800000 ( 58.24Gb )
19:10:54  RAM INFO:
19:10:54     INT_SRAM  :          0x0000070000 ( 448.00Kb )
19:10:54     EXT_RAM   :          0x0100000000 ( 4.00Gb )
19:10:54  EXT_CSD:
19:10:54     EXT_CSD_REV:         0x08
19:10:54     USER_WP:             0x00
19:10:54     BOOT_WP:             0x00
19:10:54     BOOT_WP_STATUS:      0x00
19:10:54  HEALTH:
19:10:54     Pre EOL Info: normal
19:10:54     DeviceLifeTimeEstA: 0% - 10% device life time used
19:10:54     DeviceLifeTimeEstB: 0% - 10% device life time used
19:10:54  WRITE PROTECT:
19:10:54     OTP WP: skip (STATUS_UNSUPPORT_CMD)
19:10:54  Checking USB status... USB_HIGH_SPEED
19:10:54  Read partitions info from phone... OK
19:10:54  Checking A/B state... OK
19:10:54  Read product info... [EXT4] ... OK
19:10:54  Product Brand:          samsung
19:10:54  Product Manufacturer:   samsung
19:10:54  Product Model:          SM-A136U
19:10:54  Product Name:           a13xsq
19:10:54  Product Device:         a13x
19:10:54  Product Board:          a13x
19:10:54  Board Platform:         mt6833
19:10:54  Build ID:               TP1A.220624.014
19:10:55  Build Date:             Fri Nov 17 13:58:38 KST 2023
19:10:55  Display ID:             TP1A.220624.014.A136USQS7DWK2
19:10:55  Security Patch:         2023-11-01
19:10:55  Version SDK:            33
19:10:55  Version Release:        13
19:10:55  Version Codename:       REL
19:10:55  Firmware Version:       A136USQS7DWK2
19:10:55  ODM Build ID:           SP1A.210812.016
19:10:55  Backup [frp.bin]... OK
19:10:55  Backup [persistent.bin]... OK
19:10:55  Saved to C:\Users\Sucre Vladimir\Desktop\respaldo\MTK\Samsung_SM-A136U (Samsung Galaxy A13 5G)\Erase FRP_2026-09-23_19-10-55\
19:10:55  Formatting "frp" partition... OK
19:10:55  Formatting "persistent" partition... OK
19:10:55  Writting FRP data... OK
19:10:55  Reboot device... OK
19:10:55  Operation completed