🔐 Frp Cuenta Google frp Samsung Galaxy A14 5G SM-A146P cuenta google bit 14 u14 pandora box (4 Viewers)

[servergsm]

Marca 📱

Samsung

Modelo 🔖

Samsung Galaxy A14 5G SM-A146P

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

Eliminar Cuenta Google FRP A Samsung Galaxy A14 5G SM-A146P binario 14 android 15 con pandora box

es selecionar el modelo y dar en Borrar frp Y Limpiar dejo capture te pedira formatear desde recovery y listo

Debes estar registrado para ver imágenes adjuntar

​

Selected model: Samsung SM-A146P (Samsung Galaxy A14 5G)
Operation: Erase FRP And Wipe
Software version: 9.19
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM136 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Read Efuse error
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0989
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM191 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xEC12AD09, 0x1AFC5ABD, 0x1AFF3484, 0xD1121B90
Get Chip ID... [MT6833]
Get SOC ID... [1F3B3F388925A2CF03AA6A79C88A8EF4DA1C475C879A3BBA25CB882881D38D3A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): MT128GAXAU2U228C (0003)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
   UFS_CID   : MT128GAXAU2U228C
   UFS_FWVER : 0003
   BLOCK_SIZE: 0x0000001000 (4.00Kb)
   UFS_LU0   : 0x0000400000 (4.00Mb)
   UFS_LU1   : 0x0000400000 (4.00Mb)
   UFS_LU2   : 0x1DCB000000 (119.17Gb)
RAM INFO:
   INT_SRAM: 0x0000070000 (448.00Kb)
   EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  30% - 40% device life time used
   DeviceLifeTimeEstB:  10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A146P
Product Name         : a14xmxx
Product Device       : a14xm
Build ID             : AP3A.240905.015.A2
Build Date           : Thu Oct 23 09:28:17 KST 2025
Firmware Version     : A146PXXUEEYJ5
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A146P%20(Samsung%20Galaxy%20A14%205G)/FRP_BACKUP_(2026-2-14_15-23-16)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Wipe data done!