🔐 Frp Cuenta Google FRP Samsung Galaxy A14 SM-A145R Cuenta Google Bit 4 u4 pandora box

[servergsm]

Eliminar Cuenta Google FRP A Samsung Galaxy A14 SM-A145R Binario 4 u4 Binary 4 Android 14 Con pandora box

Debes estar registrado para ver imágenes adjuntar

Aprende el método definitivo para eliminar la Cuenta Google (FRP) de tu Samsung Galaxy A14 modelo SM-A145R con el Binario 4 (U4) y sistema operativo Android 14. Utilizaremos la herramienta Pandora Box para saltar de forma segura y efectiva el bloqueo de seguridad más reciente. Si has olvidado tus credenciales o has adquirido un dispositivo bloqueado, sigue nuestra guía paso a paso para recuperar el acceso total a tu smartphone.


Test Point

Selected model: Samsung SM-A145R (Samsung Galaxy A14)
Operation: Apagar FRP
Software version: 9.6

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM14 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Read Efuse error
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM15 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xC1BEA57D, 0x81E75299, 0xC6EDF4E1, 0xFFB4EB14
Get Chip ID... [MT6768]
Get SOC ID... [5B7A21D99D7924641EE3043047584583A697526BDE55FE50FD CDE6D65C1EF8CA]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445636444242005B95D35D4A9B
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DV6DBB
EMMC_ID : 0x150100445636444242005B95D35D4A9B
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1F000000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A145R
Product Name : a14mnsxx
Product Device : a14m
Product Board : a14m
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Thu Nov 30 18:18:44 KST 2023
Display ID : TP1A.220624.014.A145RXXS4AWK6
Security Patch : 2023-11-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : A145RXXS4AWK6
Userdata FS Type : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A145R%20(Samsung%20Galaxy%20A14)/FRP_BACKUP_(2025-9-29_22-18-11)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!