🔐 Frp Cuenta Google FRP Samsung Galaxy A24 5G SM-A245M Cuenta Google Bit 11 Bit 12

servergsm · Ayer a las 10:22 PM

Guía técnica especializada para remover la cuenta Google (FRP) en el Samsung Galaxy A24 5G (SM-A245M). Cubre las últimas versiones de firmware Bit 11, Bin 12 y Bit C, funcionando bajo Android 16. Explicamos el procedimiento mediante conexión física ISP utilizando herramientas de alta gama como Z3X Easy-JTAG Plus, Flash f64 Mipi Tester y Medusa Pro 2 para saltar los parches de seguridad de Enero y Febrero 2026.

Remover Cuenta Google FRP Samsung Galaxy A24 5G SM-A245M Bit B Binario 11 Bin 12 Bit C Binario 12 Android 16 Con Z3X Easy-JTAG Plus Tambien se puede con Flash f64 Mipi tester y medusa pro 2 Nueva segurida parche de seguridad Enero Febrero 2026

Toco ISP

Pinout Utilizado

Lectura

Debes estar registrado para ver imágenes adjuntar

FRP ECHO

Debes estar registrado para ver imágenes adjuntar

Código:

eMMC_tool ver. 2.1.0.0 (release date: 01.12.2025)
Microsoft Windows 10 (64 bit) build 22631 (10.0.22621.5624)

Official telegram group: Z3X Easy Jtag Plus SoftWare Official

Looking for EasyJTAG box...
Found Z3X EasyJtagPlus
EasyJTAG API ver. 3801
EasyJTAG Box Serial = B2B6835248E8EA8E
Card Serial = AA2310EF
EasyJTAG Box Firmware = 2.5308

Firehose loaders: 957

Changelog:
01/12/2025 (ver 2.1.0.0)

   Added vendor flashing for MTK (MediaTek) devices.
   Added vendor flashing for Spreadtrum / Unisoc platforms.
   Added vendor flashing for Nvidia Tegra based devices.
   UFS unlock configuration for a UFS of chips, supporting unlock commands.
   UFS smart-report for selected ICs to quickly read health, configuration, and key diagnostic data.
   UFS DataProtect removal for compatible models, allowing safe clearing of protection when hardware/firmware permits.
   Updated Explorer with support for EXT, FAT, NTFS, EROFS, and F2FS (Read-Only)
   Added support for devices/boxes with eSIM handling (LX9 boxes activated after 09/2025).
   Added firmware v14 for LX9 boxes
   Active slot (A/B) switching for Qualcomm-based devices to simplify recovery, testing, and boot slot repair.
   Manual partition table scan for a selected ROM/LUN, helping to locate and map partitions on damaged or non-standard layouts.
   Improved authorization bypass logic for some Xiaomi models within current security limitations.
   Fixed Xiaomi Mi Account–related patch routines, increasing reliability on supported firmwares.
   Corrected and improved Preloader parser for better stability on various MTK images.
   Added OFP unpacker (Oppo/Realme-style packages).
   Added PAC unpacker (Spreadtrum/Unisoc firmware).
   Added NB0 unpacker (NB0-format images).
   Added LG firmware unpacker for compatible LG package types.   

Operation: Connect to Z3X EasyJtagPlus

Setting Interface to UFS ISP
Setting IO Levels to Low
Setting Frequence to 66 Mhz

Socket Information :
   Socket Mark: EasyJTAG UFS Socket BGA-254 by EasyJTAG 23.12.23
   Socket Serial: 01231CF38D4AF206EE
   Socket Type: UFS_SOCKET_BGA_254
UFS Power Information :
   Mode: Low, VCC: 2872 mV, VCCQ2: 1923 mV
UFS Device Information :
   UFS Manufacturer: SAMSUNG, UFS ProductName: KM5L9001DM-B424, UFS Version: 2.2
   UFS OemID: SAMSUNG_OEM_ID, UFS RefClk: 26 MHz, UFS FirmVersion: 0.06, UFS SerialNumber: 0x73FCB3B5C43B7E8C034C4A3BC48142415348373539455532
   Maximum Number of LUs: 8, Number of LUs found: 3, Number of WLUs found: 1, LUs Re-configure: Enabled
   RPMB Counter: 107282
   UFS LUN 0 (Main Boot A) Capacity: 4 MB (000000400000)
   UFS LUN 1 (Boot B) Capacity: 4 MB (000000400000)
   UFS LUN 2 Capacity: 122032 MB (001DCB000000)

Device Life Time Estimation B: 0x01   0% - 10% device life time used
Device Life Time Estimation A: 0x01   0% - 10% device life time used
Pre EOL information: 0x01   Normal (Consumed less then 80% of reserved block)

Backup saved: UFS_SAMSUNG_KM5L9001DM-B424_73FCB3B5C43B7E8C034C4A3BC48142415348373539455532_20260408_214052_config.ini  (old backup)

Do not turn the socket before you press "Close Session" button

Connected successfully

Operation: Scan PartitionTable from Source (Vendor: Qualcomm)

Scanning soft partitions from LUN 0 (Main Boot A)
GPT header is not found

Scanning soft partitions from LUN 1 (Boot B)
GPT header is not found

Scanning soft partitions from LUN 2
GPT header is found
Partition: PrimaryGPT [000000000000 - 000000006000], Size: 000000006000 (24.00 KB), Type: GPT
Partition: md5hdr [00000000C000 - 000000400000], Size: 0000003F4000 (3.95 MB), Type: Blank 
Partition: efs [000000400000 - 000000C00000], Size: 000000800000 (8.00 MB), Type: Linux (/mnt/vendor/efs)
Partition: sec_efs [000000C00000 - 000001400000], Size: 000000800000 (8.00 MB), Type: Linux (/efs)
Partition: steady [000001400000 - 000001800000], Size: 000000400000 (4.00 MB), Type: Raw
Partition: nvram [000001800000 - 000005800000], Size: 000004000000 (64.00 MB), Type: Raw


Firmware info:
   Manufacturer: samsung
   Brand: samsung
   Device: a24
   Name: a24;  a24ub
   Model: SM-A245M
   Firmware version: BP2A.250605.031.A3.A245MUBSBEZA4
   PDA version: A245MUBSBEZA4
   Firmware date: Fri Jan 16 05:42:35 KST 2026
   Incremental version: A245MUBSBEZA4
   Fingerprint: samsung/a24ub/a24:16/BP2A.250605.031.A3/A245MUBSBEZA4:user/release-keys;  samsung/a24ub/a24:16/BP2A.250605.031.A3/A245MUBSBEZA4:user/test-keys
   Android release: 16
   Security patch: 2026-01-01
   Abi: arm64-v8a
   FRP: /dev/block/persistent;  /dev/block/by-name/frp
   Platform: mt6789;  mt6631_6635;  connac1x
   Board: a24

Samsung info:
   Region: TPA
   Serial: R58W41W8BSL
   imei: 354314901938529
   KG status: Locked (RPMB)

Operation: Remove FRP

Frp found at partition: PERSISTENT
Backup saved: LUN 2_persistent_000019800000_000000080000_20260408_221908.bin
Erasing FRP ...
Erasing done

All done

🔐 Frp Cuenta Google FRP Samsung Galaxy A24 5G SM-A245M Cuenta Google Bit 11 Bit 12

servergsm

🏆Gran Maestro

Archivos adjuntos

Usuarios que están viendo este hilo.

Hilos similares