Nuevo
En línea
- Marca 📱
- Samsung
- Modelo 🔖
- N986N
- 📱 Android / Sistema operativo
- 13
- Tipo de falla / servicio 🛠️
- FRP / Desbloqueos (cuentas, IMEI, red)
- 🔧Herramienta utilizada
- umt | UMT Pro
- Estado del equipo 📋
- "Unlock / Desbloqueo de Red"
- ¿Problema resuelto?
- si | ✅ Resuelto
Device : Samsung Galaxy Note20 Ultra 5G (SM-N986N) BIT-A
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM109)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1300C00 [SD8250] 00002000
OPK_DATA : A9D990BFC28E0083943357129FEF7A6E1A58578AF93C79DAF9834A83683A29FC
Initializing Protocol...OK
Using Pre-Defined Loader [SM-N986N BIT-A.ufl]
Preparing Loader...Done
Sending Loader [SM-N986N BIT-A]...Done
Executing Loader...OK
Hardware : SD8250, THGJFAT1T84BAIRA0003 (UFS), 256 GB
LU Count : 4 [0x03B90C00] [0x00000800] [0x00000800] [0x00003C00]
Payload Info : [IN: 262144] [ OUT: 1048576] [SafeMode:ON]
Reading Partition Table...OK [78]
Reading Device Information...OK
Software : TP1A.220624.014.N986NKSSAHYH1, N986NKSSAHYH1 [Thu Aug 14 17:27:42 KST 2025]
Android Ver. : 13
Patch Level : 2025-08-01
boot.os_ver : 11
boot.sec_patch : 2025-08-01
sys.os_ver : 13
sys.sec_patch : 2025-08-01
vendor.os_ver : 11
vendor.sec_patch : 2025-08-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 13.8
NOTE: NEED TEST POINT
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM109)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1300C00 [SD8250] 00002000
OPK_DATA : A9D990BFC28E0083943357129FEF7A6E1A58578AF93C79DAF9834A83683A29FC
Initializing Protocol...OK
Using Pre-Defined Loader [SM-N986N BIT-A.ufl]
Preparing Loader...Done
Sending Loader [SM-N986N BIT-A]...Done
Executing Loader...OK
Hardware : SD8250, THGJFAT1T84BAIRA0003 (UFS), 256 GB
LU Count : 4 [0x03B90C00] [0x00000800] [0x00000800] [0x00003C00]
Payload Info : [IN: 262144] [ OUT: 1048576] [SafeMode:ON]
Reading Partition Table...OK [78]
Reading Device Information...OK
Software : TP1A.220624.014.N986NKSSAHYH1, N986NKSSAHYH1 [Thu Aug 14 17:27:42 KST 2025]
Android Ver. : 13
Patch Level : 2025-08-01
boot.os_ver : 11
boot.sec_patch : 2025-08-01
sys.os_ver : 13
sys.sec_patch : 2025-08-01
vendor.os_ver : 11
vendor.sec_patch : 2025-08-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 13.8
NOTE: NEED TEST POINT
