🔐 Frp Cuenta Google FRP Samsung Sm-A065m/Galaxy A06 Sm-A065m Bit 10 U10 Pandora Box

[servergsm]

Marca 📱

Samsung

Modelo 🔖

Samsung SM-A065M/Galaxy A06 SM-A065M

📱 Android / Sistema operativo

Android 16

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

pandora | Pandora Box

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

Remover Cuenta Google FRP A Samsung SM-A065M/Galaxy A06 SM-A065M Android 16 bit 10 u10 Bit A con pandora box Parche de seguridad Febrero 2026

Guía técnica especializada para remover la cuenta Google (FRP) en el Samsung Galaxy A06 (SM-A065M). Este tutorial explica el procedimiento paso a paso utilizando Pandora Box, diseñado específicamente para dispositivos con Android 16, Binario 10 (U10/Bit A) y el parche de seguridad de febrero de 2026. Un método profesional, rápido y efectivo para técnicos.

en pandora selecionamos modelo luego en borrar frp y limpiar conetar apagado

Debes estar registrado para ver imágenes adjuntar

​

Selected model: Samsung SM-A065M (Galaxy A06)
Operation: Erase FRP And Wipe
Software version: 9.25
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM44 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Read Efuse error
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM45 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x4574FF11, 0x405983B0, 0x0824682B, 0xBDF7FBAE
Get Chip ID... [MT6768]
Get SOC ID... [0FB6AEE3E2EEB57056E45808D1CB361E79E710DCA7392DF59D0A19E5FCC14457]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100444C3644414200F68CE4A02C0D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: DL6DAB
   EMMC_ID   : 0x150100444C3644414200F68CE4A02C0D
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
   INT_SRAM: 0x0000070000 (448.00Kb)
   EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  0% - 10% device life time used
   DeviceLifeTimeEstB:  0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... error
Read product info... [EROFS] ... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A065M
Product Name         : a06ub
Product Device       : a06
Build ID             : AP3A.240905.015.A2
Build Date           : Sat Feb 14 01:32:07 KST 2026
Firmware Version     : A065MUBSACZB8
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Pandora/Backup/MTK/Samsung_SM-A065M%20(Galaxy%20A06)/FRP_BACKUP_(2026-4-24_21-19-6)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Formatting "md_udc" partition... [P1] OK
Wipe data done!

​