🔐 Frp Cuenta Google FRP Tcl Tab11 Lte (9166g) Cuenta Google con Pandora

[servergsm]

Marca 📱

TCL

Modelo 🔖

TCL Tab11 LTE (9166g)

📱 Android / Sistema operativo

Android

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

pandora | Pandora Box

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

ELiminar Cuenta Google FRP A TCL Tab11 LTE (9166g) con pandora box
​

10:45:19 Selected model: Mediatek Mediatek
10:45:19 Operation: Erase FRP
10:45:19 Software version: 10.1.26
10:45:19
10:45:20 Connect phone in BROM mode.
10:45:20 Waiting for device... OK
10:45:27 Device found at COM38
10:45:27 Port: USB\VID_0E8D&PID_0003\5&35E09474&0&5
10:45:27 Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
10:45:27 Port type: BROM
10:45:27 Open port... OK
10:45:27 Send start cmd... OK
10:45:27 Get HW code... [0788]
10:45:27 Get HW & SW version from device... OK
10:45:27 HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
10:45:27 Detect chip [MT6771]
10:45:27 Library Version [2]
10:45:27 Select platform... OK
10:45:27 Init BROM... OK
10:45:27 Force Charge... OK
10:45:27 Disable WatchDog Timer... OK
10:45:27 Get sec config... [000000E7]
10:45:27 Active sec flags: [SBC SLA DAA]
10:45:27 Install LibUSB... OK
10:45:28 Open port... OK
10:45:28 Send start cmd... OK
10:45:28 Release testpoint, waiting 2 seconds...
10:45:30 Advanced Bypass Security... OK
10:45:32 Waiting for device... OK
10:45:32 Device found at COM38
10:45:32 Port: USB\VID_0E8D&PID_0003\5&35E09474&0&5
10:45:32 Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
10:45:32 Port type: BROM
10:45:32 Open port... OK
10:45:32 Send start cmd... OK
10:45:32 Get HW code... [0788]
10:45:32 Init BROM... OK
10:45:32 Force Charge... OK
10:45:32 Disable WatchDog Timer... OK
10:45:32 Get sec config... [000000E0]
10:45:32 Read MEID... OK
10:45:32 MEID: 773447BA13F3D648791661391C0F8333
10:45:32 Load DownloadAgent... OK
10:45:32 Search DA... OK [9]
10:45:32 DA file: MTK_AllInOne_DA_v2.crp
10:45:32 Send preloader... OK
10:45:33 Start preloader... OK
10:45:33 Checking preloader answer... OK
10:45:34 Send bootloader... OK
10:45:35 Start bootloader... OK
10:45:35 Wait for answer from bootloader... OK
10:45:35 Send SYNC signal... OK
10:45:35 Setup device enviroment... OK
10:45:35 Setup device parametres... OK
10:45:35 Receive DA SYNC signal... OK
10:45:35 Set DA parametres... OK
10:45:35 Get device connection agent... [BROM]
10:45:35 Read phone IDs before RAM init...
10:45:35 Chip ID: 0x8807008A00CA000000000000
10:45:35 HW/SW: HW 0x0788, SUB 0x8A00, HW_VER 0xCA00, SW_VER 0x0000
10:45:35 Storage: EMMC
10:45:35 EMMC ID: 0xF40122415256323158134F9989639A75
10:45:35 EMMC FW: 0x0000000000000000
10:45:35 Load EMI from phone... OK
10:45:36 Parse EMI config... OK
10:45:36 Preloader: preloader_eternals_11.bin
10:45:36 BLoader: v36 (sub 9)
10:45:36 EMI data: 0x00000390
10:45:36 Initialize external RAM... OK
10:45:38 Load DownloadAgent... OK
10:45:38 Search DA... OK [9]
10:45:38 Send 2nd DA... OK
10:45:41 [EFUSE INFO]: BROM not disabled
10:45:41 Read HRID... OK [16 bytes]
10:45:41 Get device info... OK
10:45:41 EMMC INFO:
10:45:41 EMMC_CNAME: ARV21X
10:45:41 EMMC_ID: 0xF40122415256323158134F9989639A75
10:45:41 EMMC_BOOT1: 0x0000400000 ( 4.00Mb )
10:45:41 EMMC_BOOT2: 0x0000400000 ( 4.00Mb )
10:45:41 EMMC_RPMB : 0x0000400000 ( 4.00Mb )
10:45:41 EMMC_USER : 0x1CD0000000 ( 115.25Gb )
10:45:41 RAM INFO:
10:45:41 INT_SRAM : 0x0000039000 ( 228.00Kb )
10:45:41 EXT_RAM : 0x0100000000 ( 4.00Gb )
10:45:41 EXT_CSD:
10:45:41 EXT_CSD_REV: 0x08
10:45:41 USER_WP: 0x00
10:45:41 BOOT_WP: 0x00
10:45:41 BOOT_WP_STATUS: 0x00
10:45:41 HEALTH:
10:45:41 Pre EOL Info: normal
10:45:41 DeviceLifeTimeEstA: 0% - 10% device life time used
10:45:41 DeviceLifeTimeEstB: 0% - 10% device life time used
10:45:41 WRITE PROTECT:
10:45:41 OTP WP: skip (STATUS_UNSUPPORT_CMD)
10:45:41 Checking USB status... USB_HIGH_SPEED
10:45:41 Read partitions info from phone... OK
10:45:41 Checking A/B state... OK
10:45:41 Read product info... [EXT4] ... OK
10:45:42 Product Brand: TCL
10:45:42 Product Manufacturer: TCL
10:45:42 Product Model: mssi_t_64_cn
10:45:42 Product Name: mssi_t_64_cn
10:45:42 Product Board: eternals_11
10:45:42 Board Platform: mt6771
10:45:42 Build ID: TP1A.220624.014
10:45:42 Build Date: Wed Aug 14 09:23:34 CST 2024
10:45:42 Display ID: TP1A.220624.014
10:45:42 Security Patch: 2024-07-05
10:45:42 Version SDK: 33
10:45:42 Version Release: 13
10:45:42 Version Codename: REL
10:45:42 Firmware Version: eng.jenkin.20240814.092646
10:45:42 Userdata FS Type: F2FS
10:45:42 ODM Build ID: SP1A.210812.016
10:45:43 Backup [frp.bin]... OK
10:45:43 Saved to C:\Users\RASHEED LJ\Desktop\New folder (2)\MTK\Mediatek_Mediatek\Erase FRP_2026-08-26_10-45-43\
10:45:43 Formatting "frp" partition... OK
10:45:43 Writting FRP data... OK
10:45:44 Reboot device... OK
10:45:44 Operation completed