🔐 Frp Cuenta Google frp Tecno Spark 10 Pro (KI7 Infinity-Box

[servergsm]

Tecno Spark 10 Pro (KI7 cuenta google Infinity-Box

, mantén presionados los botones de volumen y luego conéctate a la computadora.

Debes estar registrado para ver imágenes adjuntar

​

Wait...
S/N: 0041DEDF35 v0160
Chinese Miracle II - MT2 Service Tool v2.57
Init log engine... Ok
Build directories tree... Ok
Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 5 dirs: 0
Verify device database...
BuiltIn: 28 Custom: 0
Build device list... Ok
Scan 89 profiles... Ok
libusb: v1.2.6.0
Init environment... Ok
Load IDBase v915508 Ok
DA selected: Tecno | 2023-05 | MTK_AllInOne_DA.bin | auth_sv5.auth
Preloader Mode without test-point/disassembly.
MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
DA selected: Tecno | KI7 | MTK_AllInOne_DA.1d5fdec4.bin | preloader_ki7_v7510.bin

Operation: Identify [ v2.57 ]
Wait...
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Port: Both [ B + P ]; High-Speed: On
[-] Force BROM
[-] Local SLA
[+] Auto-EMI
[+] FireFly-Over-DA
- Power device Off [remember Test-Point]
- Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek USB Port (COM40)
MODE [0]: BOOTROM; PORT: 40
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
  CODE: Talbot
  TYPE: MODERN  [RAPHAEL]
  MEID: 6FEB0F00385EC0BBB4AA8B401605A540
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: B34AF78BD0E47B589C025B7DD817E46544AE09F6D99DD9811E73E944CC721AF6
SLA: Local Auth [Forced mode]
  Start Auth... Ok
  Continue Auth... Ok
FF: Looking for EMI Found
SLA: Start 0x15
  Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 6FEB0F00385EC0BBB4AA8B401605A540
AGENT: AUTO: Tecno: KI7
  [07fb00a6] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
  [cbcefa71] C:\InfinityBox\CM2MT2\boot\Tecno\KI7\preloader_ki7_v7510.bin
Looking for suitable bootchain in DA...
Found: MT6768; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
Jump to DA... Ok
Sync... Ok
DA: Agent Started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized
EMMC
CID: D62D004D4D433235365117B0A52B4AE3 crc Ok
  Vendor: Foresee OEM: 11520 ID: 4D4D43323536 [MMC256] PRV: 0x51
  Serial: 397452587 0x17B0A52B
  MM/YY: 4/2023

EMI: Init via preloader_ki7_v7510.bin
EMI: MT6752 preloader_ki7_v7510.bin with 9 memory type(s)
  1. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 512.00 Mb
  2. eMMC DDR3 ID: 90014A68423861503E   Hynix     hB8aP> RAM: 3.00 Gb
  3. eMMC LP_DDR4X ID: 90014A68433861503E   Hynix     hC8aP> RAM: 4.00 Gb
  4. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  5. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  6. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 4.00 Gb
  7. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  8. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  9. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 4.00 Gb
Push EMI... EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC Ok

Load HW info...
RAM: SRAM: 0x00070000 [ 448.00 Kb ]
RAM: DRAM: 0x100000000 [ 4.00 Gb ]

EMMC
CID: D62D004D4D433235365117B0A52B4AE3 crc Ok
  Vendor: Foresee OEM: 11520 ID: 4D4D43323536 [MMC256] PRV: 0x51
  Serial: 397452587 0x17B0A52B
  MM/YY: 4/2023
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x3A40A00000 [ 233.01 Gb ]

CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0707
  CODE: Talbot
  TYPE: MODERN  [RAPHAEL]
  RNID: 212B8F422F697725BEE54A2AD883A770
  MEID: 6FEB0F00385EC0BBB4AA8B401605A540

USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 53
Get slot info... b
Select info source... [vendor_boot_b] [boot_b] Ok
  Product Brand: TECNO
  Product Device: TECNO-KI7
  Product Model: TECNO KI7
  Product Name: KI7-GL
  SW: TECNO/KI7-GL/TECNO-KI7:12/SP1A.210812.016/230526V2054:user/release-keys
  Patch Level: SP1A.210812.016
  Display ID: KI7-V7510AACDEGHJKLMN-S-GL-230526V2054
  SW Version: 230526V2054
  Ver. CodeName: REL
  Ver. Release: 12
  Sec. Patch: 2023-05-05
  Build Time: 26/05/2023 03:31:40 م
  Product Info: ki7_v7510
  SW: vnd_ki7_v7510-user 12 SP1A.210812.016 337112 release-keys
  Product Manfct: TECNO
  Product Board: TECNO-KI7
  Board Platform: mt6768
Device ID: tecno-ki7-ki7-gl
Strategy: [tecno]
Firmware ID: MT6768_TECNO_TECNO_KI7_OSv12_KI7-V7510AACDEGHJKLMN-S-GL-230526V2054_SP1A.210812.016_ki7_v7510
Verify firmware [MT6768_TECNO_TECNO_KI7_OSv12_KI7-V7510AACDEGHJKLMN-S-GL-230526V2054_SP1A.210812.016_ki7_v7510]...
Firmware is unknown
Please upload https://infinity-box.com/?r=100020

Analyze userdata...
userData: fileSystem : [f2fs]  with FBE [file based encryption]
Backup to C:\InfinityBox\CM2MT2\backup\MT6768__6FEB0F00385EC0BBB4AA8B401605A540\
Items to check: 22
Read [37] NVRAM
NVRAM: Items: 0xA3 Size: 0x08C64F State: Ok
  WiFi MAC: 409A30C6891C
  BT MAC: 409A30C6891D
  IMEI[1]: 354462304064060
  IMEI[2]: 354462304064078
Read [19] NVDATA
Read [3] PROINFO
Read [18] NVCFG
Read [21] PROTECT1
Read [1] PGPT
Read [20] PERSIST
Read [0] PRELOADER
Done 8 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6768__6FEB0F00385EC0BBB4AA8B401605A540\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6768__6FEB0F00385EC0BBB4AA8B401605A540.7z Verified
EMMC
CID: D62D004D4D433235365117B0A52B4AE3 crc Ok
  Vendor: Foresee OEM: 11520 ID: 4D4D43323536 [MMC256] PRV: 0x51
  Serial: 397452587 0x17B0A52B
  MM/YY: 4/2023
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x3A40A00000 [ 233.01 Gb ]
Verify config values... Ok

STORAGE Life Status: eMMC : OK
STORAGE OTP Status: UNLOCKED
STORAGE RPMB Status: eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]

Analyze preloader...
EMI: MT6752 preloader_ki7_v7510.bin with 9 memory type(s)
  1. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 512.00 Mb
  2. eMMC DDR3 ID: 90014A68423861503E   Hynix     hB8aP> RAM: 3.00 Gb
  3. eMMC LP_DDR4X ID: 90014A68433861503E   Hynix     hC8aP> RAM: 4.00 Gb
  4. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  5. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  6. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 4.00 Gb
  7. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  8. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  9. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 4.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_ki7_v7510.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_ki7_v7510.bin [f793b04a]... Exist

Probe FRP... Most probably Off
Reset port...
Trying to reboot...
Finished 2 min 4 sec
Reconnect Power/Cable now

Operation: Reset Settings/Format FS [ v2.57 ]
[+] Smart Analyzer
[-] Wipe
[-] Userdata
[+] FRP
[-] Accounts
WARNING: Reset may delete ALL USER DATA!
Reset Userdata is Off
If FRP still active after reset make [Userdata] On and repeat operation
Wait...
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Port: Both [ B + P ]; High-Speed: On
[-] Force BROM
[-] Local SLA
[+] Auto-EMI
[+] FireFly-Over-DA
- Power device Off [remember Test-Point]
- Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek USB Port (COM40)
MODE [0]: BOOTROM; PORT: 40
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
  CODE: Talbot
  TYPE: MODERN  [RAPHAEL]
  MEID: 6FEB0F00385EC0BBB4AA8B401605A540
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: B34AF78BD0E47B589C025B7DD817E46544AE09F6D99DD9811E73E944CC721AF6
SLA: Local Auth [Forced mode]
  Start Auth... Ok
  Continue Auth... Ok
EMI known
SLA: Start 0x15
  Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 6FEB0F00385EC0BBB4AA8B401605A540
AGENT: AUTO: Tecno: KI7
  [07fb00a6] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
  [cbcefa71] C:\InfinityBox\CM2MT2\boot\Tecno\KI7\preloader_ki7_v7510.bin
Looking for suitable bootchain in DA...
Found: MT6768; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
Jump to DA... Ok
Sync... Ok
DA: Agent Started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized
EMMC
CID: D62D004D4D433235365117B0A52B4AE3 crc Ok
  Vendor: Foresee OEM: 11520 ID: 4D4D43323536 [MMC256] PRV: 0x51
  Serial: 397452587 0x17B0A52B
  MM/YY: 4/2023

EMI: Init via preloader_ki7_v7510.bin
EMI: MT6752 preloader_ki7_v7510.bin with 9 memory type(s)
  1. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 512.00 Mb
  2. eMMC DDR3 ID: 90014A68423861503E   Hynix     hB8aP> RAM: 3.00 Gb
  3. eMMC LP_DDR4X ID: 90014A68433861503E   Hynix     hC8aP> RAM: 4.00 Gb
  4. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  5. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  6. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 4.00 Gb
  7. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  8. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 8.00 Gb
  9. DRAM LP_DDR4X ID: NOT_DEFINED          Unknown 0x0000  RAM: 4.00 Gb
Push EMI... EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC Ok

Load HW info...
RAM: SRAM: 0x00070000 [ 448.00 Kb ]
RAM: DRAM: 0x100000000 [ 4.00 Gb ]

EMMC
CID: D62D004D4D433235365117B0A52B4AE3 crc Ok
  Vendor: Foresee OEM: 11520 ID: 4D4D43323536 [MMC256] PRV: 0x51
  Serial: 397452587 0x17B0A52B
  MM/YY: 4/2023
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x3A40A00000 [ 233.01 Gb ]

CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0707
  CODE: Talbot
  TYPE: MODERN  [RAPHAEL]
  RNID: 212B8F422F697725BEE54A2AD883A770
  MEID: 6FEB0F00385EC0BBB4AA8B401605A540

USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 53
Get slot info... b
Select info source... [vendor_boot_b] [boot_b] Ok
  Product Brand: TECNO
  Product Device: TECNO-KI7
  Product Model: TECNO KI7
  Product Name: KI7-GL
  SW: TECNO/KI7-GL/TECNO-KI7:12/SP1A.210812.016/230526V2054:user/release-keys
  Patch Level: SP1A.210812.016
  Display ID: KI7-V7510AACDEGHJKLMN-S-GL-230526V2054
  SW Version: 230526V2054
  Ver. CodeName: REL
  Ver. Release: 12
  Sec. Patch: 2023-05-05
  Build Time: 26/05/2023 03:31:40 م
  Product Info: ki7_v7510
  SW: vnd_ki7_v7510-user 12 SP1A.210812.016 337112 release-keys
  Product Manfct: TECNO
  Product Board: TECNO-KI7
  Board Platform: mt6768
Device ID: tecno-ki7-ki7-gl
Strategy: [tecno]
Firmware ID: MT6768_TECNO_TECNO_KI7_OSv12_KI7-V7510AACDEGHJKLMN-S-GL-230526V2054_SP1A.210812.016_ki7_v7510
Android ver: 12
UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]

EMMC
CID: D62D004D4D433235365117B0A52B4AE3 crc Ok
  Vendor: Foresee OEM: 11520 ID: 4D4D43323536 [MMC256] PRV: 0x51
  Serial: 397452587 0x17B0A52B
  MM/YY: 4/2023
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x3A40A00000 [ 233.01 Gb ]
Verify config values... Ok
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6768__6FEB0F00385EC0BBB4AA8B401605A540

Stage: Android OS Off
Stage: FRP...
[1] PROTECTION... Ok Ok
Done
Stage: Smart... Nothing to-do
Reset port...
Trying to reboot...
Finished 1 min 0 sec
Reconnect Power/Cable now