🔐 Frp Cuenta Google FRP Wiko Voix U616at Cuenta Google con Pandora Box

[servergsm]

🧠Procesador / CPU

MediaTek (MTK

🏷️Marca

Otras Marcas

📱Modelo

Wiko Voix U616AT

🤖 Android / Sistema operativo

Android

🔧Tipo de falla / servicio

FRP / Desbloqueos (cuentas, IMEI, red)

🧰Herramienta utilizada

pandora | Pandora Box

✅Estado del equipo

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

Eliminar Cuenta Google FRp A Wiko Voix U616AT pandora box

selecionar mediatek dar en erase frp y conetar apagado con teclas de volumen

Debes estar registrado para ver imágenes adjuntar

​

11:15:57  Selected model:         Mediatek Mediatek
11:15:57  Operation:              Erase FRP and Wipe
11:15:57  Software version:       10.2.20
11:15:57   
11:15:59  Connect phone in BROM/PRELOADER mode.
11:15:59  Waiting for device... OK
11:16:04  Device found at COM22
11:16:04  Port:                   USB\VID_0E8D&PID_0003\7&1F0EE770&0&3
11:16:04  Driver:                 [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
11:16:04  Port type:              BROM
11:16:04  Open port... OK
11:16:04  Send start cmd... OK
11:16:04  Get HW code...          [0717]
11:16:04  Get HW & SW version from device... OK
11:16:04  HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
11:16:04  Detect chip             [MT6761]
11:16:04  Library Version         [2]
11:16:04  Select platform... OK
11:16:04  Init BROM... OK
11:16:04  Force Charge... OK
11:16:04  Disable WatchDog Timer... OK
11:16:04  Get sec config...       [000000E1]
11:16:04  Active sec flags:       [SBC]
11:16:04  SecConfig=0x000000E1 (SBC+SLA off) - BROM auth not required
11:16:04  Read MEID... OK
11:16:04  MEID: B721B48BC98B763BC346956DAA49BC9A
11:16:04  Load DownloadAgent... OK
11:16:04  Search DA... OK [5]
11:16:04  DA file: MTK_AllInOne_DA_v2.crp
11:16:04  Send preloader... OK
11:16:04  Start preloader... OK
11:16:04  Checking preloader answer... OK
11:16:05  Send bootloader... OK
11:16:07  Start bootloader... OK
11:16:07  Wait for answer from bootloader... OK
11:16:07  Send SYNC signal... OK
11:16:07  Setup device enviroment... OK
11:16:07  Setup device parametres... OK
11:16:07  Receive DA SYNC signal... OK
11:16:07  Set DA parametres... OK
11:16:07  Get device connection agent... [BROM]
11:16:07  Read phone IDs before RAM init...
11:16:07     Chip ID:             0x1707008A01CA000200000000
11:16:07     HW/SW:               HW 0x0717, SUB 0x8A00, HW_VER 0xCA01, SW_VER 0x0200
11:16:07     Storage:             EMMC
11:16:07     EMMC ID:             0xF40122426977696E20110D5A0B3859ED
11:16:07     EMMC FW:             0x0000000000000000
11:16:07  Load EMI from phone... OK
11:16:07  Parse EMI config... OK
11:16:07     Preloader:           preloader_u616at.bin
11:16:07     BLoader:             v38 (sub 9)
11:16:07     EMI data:            0x000002F0
11:16:07  Initialize external RAM... OK
11:16:08  Load DownloadAgent... OK
11:16:08  Search DA... OK [5]
11:16:08  Send 2nd DA... OK
11:16:09  [EFUSE INFO]:  BROM not disabled
11:16:09  Get device info... OK
11:16:09  EMMC INFO:
11:16:09     EMMC_CNAME: Biwin
11:16:09     EMMC_ID: 0xF40122426977696E20110D5A0B3859ED
11:16:09     EMMC_BOOT1:          0x0000400000 ( 4.00Mb )
11:16:09     EMMC_BOOT2:          0x0000400000 ( 4.00Mb )
11:16:09     EMMC_RPMB :          0x0000400000 ( 4.00Mb )
11:16:09     EMMC_USER :          0x0748000000 ( 29.13Gb )
11:16:09  RAM INFO:
11:16:09     INT_SRAM  :          0x000003A500 ( 233.25Kb )
11:16:09     EXT_RAM   :          0x00C0000000 ( 3.00Gb )
11:16:09  EXT_CSD:
11:16:09     EXT_CSD_REV:         0x08
11:16:09     USER_WP:             0x00
11:16:09     BOOT_WP:             0x00
11:16:09     BOOT_WP_STATUS:      0x00
11:16:09  HEALTH:
11:16:09     Pre EOL Info: normal
11:16:09     DeviceLifeTimeEstA: 0% - 10% device life time used
11:16:09     DeviceLifeTimeEstB: 40% - 50% device life time used
11:16:09  WRITE PROTECT:
11:16:09     OTP WP: skip (STATUS_UNSUPPORT_CMD)
11:16:09  Checking USB status... USB_HIGH_SPEED
11:16:09  Read partitions info from phone... OK
11:16:09  Checking A/B state... OK [A]
11:16:09  Read product info... [EXT4] ... OK
11:16:09  Product Brand:          WIKO
11:16:09  Product Manufacturer:   TINNO
11:16:09  Product Model:          U616AT
11:16:09  Product Name:           U616AT
11:16:09  Product Device:         U616AT
11:16:09  Product Board:          U616AT
11:16:09  Board Platform:         mt6761
11:16:09  Build ID:               SP1A.210812.016
11:16:09  Build Date:             Tue Aug  6 16:25:00 CST 2024
11:16:09  Display ID:             SP1A.210812.016 release-keys
11:16:09  Security Patch:         2024-07-05
11:16:09  Version SDK:            31
11:16:09  Version Release:        12
11:16:09  Version Codename:       REL
11:16:09  Firmware Version:       1722932700
11:16:10  Backup [frp.bin]... OK
11:16:10  Saved to C:\Users\Sucre Vladimir\Desktop\respaldo\MTK\Mediatek_Mediatek\Erase FRP_2026-10-10_11-16-10\
11:16:10  Formatting "frp" partition... OK
11:16:10  Writting FRP data... OK
11:16:10  Formatting "userdata" partition... OK
11:16:11  Formatting "metadata" partition... OK
11:16:11  Formatting "md_udc" partition... OK
11:16:11  Reboot device... OK
11:16:11  Operation completed