🔐 Frp Cuenta Google Frp Y6 2019 Mrd-lx3 Sigma Via Test Point

[servergsm]

Frp Huawei Y6-2019 ( mrd-lx3) con sigma via test point

1. Seleccionan la plataforma MTK
2. Van a la parte de services
3. En serial port : USB(autodect)
4. En MTK Boot: HUAWEI MRD LX3
5. Clic en Remove FRP
6. Conectan el celular con test point.
7. Esperan 10 segundos que termine y listo.

Log del proceso:

--------- 2019-10-06 12:40:06 ---------
SigmaKey 2.33.07 MTK: Remove FRP (Huawei MRD-LX3)
Baseband Processor:MT6761, HW Rev. A.01, SW Rev. 2.00
Testing external RAM...DRAM, 2 Gb
Detecting flash...eMMC, Flash size: 29.14 Gb
Removing FRP lock......Done

Debes estar registrado para ver imágenes adjuntar

Debes estar registrado para ver imágenes adjuntar

​

 

[ronald33]

q driver se necesita no conecta el telefono solo dice conectando ADB; y no hace el procedimiento

 

[jonatanca]

No tengo punto test point me podrias decir hacia donde va

 

[EDIZTO]

Está indicado en la imagen. Hay un grupo de 8 puntos de cobre que muestra el recuadro, los dos más pequeños de la izquierda, usa de esos 2 puntos pequeños el superior y haces el jumper con una pinza conectando a cualquier lata protectora o punto de tieraa.

 

[ed2442]

listo........... ignoren donde dice error, me temblo la mano y se me desconecto el point la primera vez ?

Debes estar registrado para ver imágenes adjuntar

 

[graken89]

Frp Huawei Y6-2019 ( mrd-lx3) con sigma via test point

1. Seleccionan la plataforma MTK
2. Van a la parte de services
3. En serial port : USB(autodect)
4. En MTK Boot: HUAWEI MRD LX3
5. Clic en Remove FRP
6. Conectan el celular con test point.
7. Esperan 10 segundos que termine y listo.

Log del proceso:

--------- 2019-10-06 12:40:06 ---------
SigmaKey 2.33.07 MTK: Remove FRP (Huawei MRD-LX3)
Baseband Processor:MT6761, HW Rev. A.01, SW Rev. 2.00
Testing external RAM...DRAM, 2 Gb
Detecting flash...eMMC, Flash size: 29.14 Gb
Removing FRP lock......Done

Debes estar registrado para ver imágenes adjuntar

si funciona lo probe con sigma y tambien funciona con nck seleccionando huawei y modelo mrd-lx3 reset frp y conectan con test point

 

[ESCORPION33]

Al igual con octoplus frp:

Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\18-01-2022_11-46-16.log" created (18/01/2022 11:46:16 ).
INFO : 18/01/2022 11:46:41 > Welcome to Octoplus FRP Tool v.2.0.8.1
INFO : 18/01/2022 11:46:41 > Card S/N: 00003BEA
INFO : 18/01/2022 12:21:39 > Work ID: 0000000002214477
INFO : 18/01/2022 12:21:39 > Platform: HUAWEI
INFO : 18/01/2022 12:21:39 > Selected model: MRD-LX3
WARN : 18/01/2022 12:21:39 > Put the phone into EDL mode:
WARN : 18/01/2022 12:21:39 > 1. Attach testpoint as shown in Help manual;
WARN : 18/01/2022 12:21:39 > 2. Connect USB cable;
WARN : 18/01/2022 12:21:39 > 3. Release testpoint after 3-5 seconds.
INFO : 18/01/2022 12:21:39 > Searching for a phone. Please wait...
INFO : 18/01/2022 12:22:00 > Found phone on COM16
INFO : 18/01/2022 12:22:00 > Port name: MediaTek USB Port (COM16)
INFO : 18/01/2022 12:22:00 > Detecting Chip Version...
INFO : 18/01/2022 12:22:00 > HW Chip: MT6761: 0717.0000
INFO : 18/01/2022 12:22:00 > HW Version: 8A00.CA01.0200.0000
INFO : 18/01/2022 12:22:00 > Connecting...
INFO : 18/01/2022 12:22:00 > Target Config: 00E5
WARN : 18/01/2022 12:22:00 > Brom Version: 05
INFO : 18/01/2022 12:22:00 > BootLoader Version: FE
INFO : 18/01/2022 12:22:00 > Sending auth...
INFO : 18/01/2022 12:22:00 > Sending Auth Data...
INFO : 18/01/2022 12:22:00 > Target Config: 0x000000E5
INFO : 18/01/2022 12:22:00 > Searching Download Agent...
INFO : 18/01/2022 12:22:06 > Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1
INFO : 18/01/2022 12:22:06 > Sending Download Agent...
INFO : 18/01/2022 12:22:06 > DA sent successfully
INFO : 18/01/2022 12:22:06 > Initializing DA...
INFO : 18/01/2022 12:22:06 > Synchronizing with DA...
INFO : 18/01/2022 12:22:06 > Mobile Status: SYNC
INFO : 18/01/2022 12:22:07 > Mobile Status: brom
INFO : 18/01/2022 12:22:07 > Sending BootLoader Info...
INFO : 18/01/2022 12:22:07 > Initializing Memory Flash..
INFO : 18/01/2022 12:22:07 > Initialization successfully completed
INFO : 18/01/2022 12:22:07 > Sending loaders...
INFO : 18/01/2022 12:22:07 > Mobile Status: SYNC
INFO : 18/01/2022 12:22:07 > Reading Flash Info...
INFO : 18/01/2022 12:22:07 > EMMC rpmb size: 16 Mb
INFO : 18/01/2022 12:22:07 > EMMC boot1 size: 4 Mb
INFO : 18/01/2022 12:22:07 > EMMC boot2 size: 4 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp1 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp2 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp3 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp4 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC user area size: 29820 Mb
INFO : 18/01/2022 12:22:07 > eMMC Flash: .90014A68.42386150.3E010EE9.3429568B
INFO : 18/01/2022 12:22:07 > eMMC Flash: Hynix: hB8aP>
INFO : 18/01/2022 12:22:07 > Internal RAM size: 512 Kb
INFO : 18/01/2022 12:22:07 > External RAM size: 2048 Mb
INFO : 18/01/2022 12:22:07 > Reading partition...
INFO : 18/01/2022 12:22:08 > Reading info...
INFO : 18/01/2022 12:22:10 > Searching for signatures...
INFO : 18/01/2022 12:22:10 > Switching to high-speed success!
INFO : 18/01/2022 12:22:10 > Resetting FRP lock..
INFO : 18/01/2022 12:22:13 > Backup saved as HUAWEI_MRD-LX3_18-01-2022_12-22-07.dump file
WARN : 18/01/2022 12:22:13 > FRP lock is successfully reseted!
INFO : 18/01/2022 12:22:13 > Performed by 2.0.8.1 Software version.
INFO : 18/01/2022 12:22:13 >
Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\18-01-2022_11-46-16.log" closed (18/01/2022 12:30:32 ).

 

[angel009]

Al igual con octoplus frp:

Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\18-01-2022_11-46-16.log" created (18/01/2022 11:46:16 ).
INFO : 18/01/2022 11:46:41 > Welcome to Octoplus FRP Tool v.2.0.8.1
INFO : 18/01/2022 11:46:41 > Card S/N: 00003BEA
INFO : 18/01/2022 12:21:39 > Work ID: 0000000002214477
INFO : 18/01/2022 12:21:39 > Platform: HUAWEI
INFO : 18/01/2022 12:21:39 > Selected model: MRD-LX3
WARN : 18/01/2022 12:21:39 > Put the phone into EDL mode:
WARN : 18/01/2022 12:21:39 > 1. Attach testpoint as shown in Help manual;
WARN : 18/01/2022 12:21:39 > 2. Connect USB cable;
WARN : 18/01/2022 12:21:39 > 3. Release testpoint after 3-5 seconds.
INFO : 18/01/2022 12:21:39 > Searching for a phone. Please wait...
INFO : 18/01/2022 12:22:00 > Found phone on COM16
INFO : 18/01/2022 12:22:00 > Port name: MediaTek USB Port (COM16)
INFO : 18/01/2022 12:22:00 > Detecting Chip Version...
INFO : 18/01/2022 12:22:00 > HW Chip: MT6761: 0717.0000
INFO : 18/01/2022 12:22:00 > HW Version: 8A00.CA01.0200.0000
INFO : 18/01/2022 12:22:00 > Connecting...
INFO : 18/01/2022 12:22:00 > Target Config: 00E5
WARN : 18/01/2022 12:22:00 > Brom Version: 05
INFO : 18/01/2022 12:22:00 > BootLoader Version: FE
INFO : 18/01/2022 12:22:00 > Sending auth...
INFO : 18/01/2022 12:22:00 > Sending Auth Data...
INFO : 18/01/2022 12:22:00 > Target Config: 0x000000E5
INFO : 18/01/2022 12:22:00 > Searching Download Agent...
INFO : 18/01/2022 12:22:06 > Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1
INFO : 18/01/2022 12:22:06 > Sending Download Agent...
INFO : 18/01/2022 12:22:06 > DA sent successfully
INFO : 18/01/2022 12:22:06 > Initializing DA...
INFO : 18/01/2022 12:22:06 > Synchronizing with DA...
INFO : 18/01/2022 12:22:06 > Mobile Status: SYNC
INFO : 18/01/2022 12:22:07 > Mobile Status: brom
INFO : 18/01/2022 12:22:07 > Sending BootLoader Info...
INFO : 18/01/2022 12:22:07 > Initializing Memory Flash..
INFO : 18/01/2022 12:22:07 > Initialization successfully completed
INFO : 18/01/2022 12:22:07 > Sending loaders...
INFO : 18/01/2022 12:22:07 > Mobile Status: SYNC
INFO : 18/01/2022 12:22:07 > Reading Flash Info...
INFO : 18/01/2022 12:22:07 > EMMC rpmb size: 16 Mb
INFO : 18/01/2022 12:22:07 > EMMC boot1 size: 4 Mb
INFO : 18/01/2022 12:22:07 > EMMC boot2 size: 4 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp1 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp2 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp3 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp4 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC user area size: 29820 Mb
INFO : 18/01/2022 12:22:07 > eMMC Flash: .90014A68.42386150.3E010EE9.3429568B
INFO : 18/01/2022 12:22:07 > eMMC Flash: Hynix: hB8aP>
INFO : 18/01/2022 12:22:07 > Internal RAM size: 512 Kb
INFO : 18/01/2022 12:22:07 > External RAM size: 2048 Mb
INFO : 18/01/2022 12:22:07 > Reading partition...
INFO : 18/01/2022 12:22:08 > Reading info...
INFO : 18/01/2022 12:22:10 > Searching for signatures...
INFO : 18/01/2022 12:22:10 > Switching to high-speed success!
INFO : 18/01/2022 12:22:10 > Resetting FRP lock..
INFO : 18/01/2022 12:22:13 > Backup saved as HUAWEI_MRD-LX3_18-01-2022_12-22-07.dump file
WARN : 18/01/2022 12:22:13 > FRP lock is successfully reseted!
INFO : 18/01/2022 12:22:13 > Performed by 2.0.8.1 Software version.
INFO : 18/01/2022 12:22:13 >
Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\18-01-2022_11-46-16.log" closed (18/01/2022 12:30:32 ).

Lo colocas via tp o asi solo conectando el equipo

 

[ESCORPION33]

Al igual con octoplus frp:

Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\18-01-2022_11-46-16.log" created (18/01/2022 11:46:16 ).
INFO : 18/01/2022 11:46:41 > Welcome to Octoplus FRP Tool v.2.0.8.1
INFO : 18/01/2022 11:46:41 > Card S/N: 00003BEA
INFO : 18/01/2022 12:21:39 > Work ID: 0000000002214477
INFO : 18/01/2022 12:21:39 > Platform: HUAWEI
INFO : 18/01/2022 12:21:39 > Selected model: MRD-LX3
WARN : 18/01/2022 12:21:39 > Put the phone into EDL mode:
WARN : 18/01/2022 12:21:39 > 1. Attach testpoint as shown in Help manual;
WARN : 18/01/2022 12:21:39 > 2. Connect USB cable;
WARN : 18/01/2022 12:21:39 > 3. Release testpoint after 3-5 seconds.
INFO : 18/01/2022 12:21:39 > Searching for a phone. Please wait...
INFO : 18/01/2022 12:22:00 > Found phone on COM16
INFO : 18/01/2022 12:22:00 > Port name: MediaTek USB Port (COM16)
INFO : 18/01/2022 12:22:00 > Detecting Chip Version...
INFO : 18/01/2022 12:22:00 > HW Chip: MT6761: 0717.0000
INFO : 18/01/2022 12:22:00 > HW Version: 8A00.CA01.0200.0000
INFO : 18/01/2022 12:22:00 > Connecting...
INFO : 18/01/2022 12:22:00 > Target Config: 00E5
WARN : 18/01/2022 12:22:00 > Brom Version: 05
INFO : 18/01/2022 12:22:00 > BootLoader Version: FE
INFO : 18/01/2022 12:22:00 > Sending auth...
INFO : 18/01/2022 12:22:00 > Sending Auth Data...
INFO : 18/01/2022 12:22:00 > Target Config: 0x000000E5
INFO : 18/01/2022 12:22:00 > Searching Download Agent...
INFO : 18/01/2022 12:22:06 > Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1
INFO : 18/01/2022 12:22:06 > Sending Download Agent...
INFO : 18/01/2022 12:22:06 > DA sent successfully
INFO : 18/01/2022 12:22:06 > Initializing DA...
INFO : 18/01/2022 12:22:06 > Synchronizing with DA...
INFO : 18/01/2022 12:22:06 > Mobile Status: SYNC
INFO : 18/01/2022 12:22:07 > Mobile Status: brom
INFO : 18/01/2022 12:22:07 > Sending BootLoader Info...
INFO : 18/01/2022 12:22:07 > Initializing Memory Flash..
INFO : 18/01/2022 12:22:07 > Initialization successfully completed
INFO : 18/01/2022 12:22:07 > Sending loaders...
INFO : 18/01/2022 12:22:07 > Mobile Status: SYNC
INFO : 18/01/2022 12:22:07 > Reading Flash Info...
INFO : 18/01/2022 12:22:07 > EMMC rpmb size: 16 Mb
INFO : 18/01/2022 12:22:07 > EMMC boot1 size: 4 Mb
INFO : 18/01/2022 12:22:07 > EMMC boot2 size: 4 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp1 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp2 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp3 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC gp4 size: 0 Mb
INFO : 18/01/2022 12:22:07 > EMMC user area size: 29820 Mb
INFO : 18/01/2022 12:22:07 > eMMC Flash: .90014A68.42386150.3E010EE9.3429568B
INFO : 18/01/2022 12:22:07 > eMMC Flash: Hynix: hB8aP>
INFO : 18/01/2022 12:22:07 > Internal RAM size: 512 Kb
INFO : 18/01/2022 12:22:07 > External RAM size: 2048 Mb
INFO : 18/01/2022 12:22:07 > Reading partition...
INFO : 18/01/2022 12:22:08 > Reading info...
INFO : 18/01/2022 12:22:10 > Searching for signatures...
INFO : 18/01/2022 12:22:10 > Switching to high-speed success!
INFO : 18/01/2022 12:22:10 > Resetting FRP lock..
INFO : 18/01/2022 12:22:13 > Backup saved as HUAWEI_MRD-LX3_18-01-2022_12-22-07.dump file
WARN : 18/01/2022 12:22:13 > FRP lock is successfully reseted!
INFO : 18/01/2022 12:22:13 > Performed by 2.0.8.1 Software version.
INFO : 18/01/2022 12:22:13 >
Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\18-01-2022_11-46-16.log" closed (18/01/2022 12:30:32 ).

Lo colocas via tp o asi solo conectando el equipo

Por test point