Offline
, NCK Android MTK me da este logo:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.6
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM3)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM5)
Build ID: NRD90M
Display ID: M4_SS4453-R_VOLTE_S10_Ver200
Version: 7.0
Build Date: Fri Feb 9 16:19:57 CST 2018
Build Date: 1518164397
Model: M4 SS4453-R
Brand: M4TEL
Device: ELEGANCE01A-S10A
Manufacturer: M4TEL
Mediatek Version Release: alps-mp-n0.mp1-V1.19_ckt6737m.65.n_P33
FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
This phone have FRP partition.
IMEI[1]:
IMEI[2]:
Read done.
Wait untill phone will start charging.
All done.
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.6
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM3)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM5)
Build ID: NRD90M
Display ID: M4_SS4453-R_VOLTE_S10_Ver200
Version: 7.0
Build Date: Fri Feb 9 16:19:57 CST 2018
Build Date: 1518164397
Model: M4 SS4453-R
Brand: M4TEL
Device: ELEGANCE01A-S10A
Manufacturer: M4TEL
Mediatek Version Release: alps-mp-n0.mp1-V1.19_ckt6737m.65.n_P33
FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
This phone have FRP partition.
IMEI[1]:
IMEI[2]:
Read done.
Wait untill phone will start charging.
All done.