liberar Caribe 4 unlock

[servergsm]

Hola, aqui les dejo este aporte liberado con la maravillosa NCK BOX.

Con el programa NCK BOX ANDROID MTK 1.8.6.6 vamos a la pestaña Unlocking , elegimos modelo por cpu, elegimos MT6572_emmc, Flash Mode y direct unlock.

cuando el programa te pida conectar el telefono lo conectamos apagado con la bateria puesta (CON CARGA) y WALA a cobrar!.

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.6.6
Selected model: MT6572_EMMC
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM34)
IMEI[1]: 8628---------------
IMEI[2]: 8628---------------
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.