liberar MS323 z3x LG 2-3G Tool V

[servergsm]

Para liberar con Z3X este modelo no es necesario hacer Root, hacer lo siguiente:

1 Activar puerto Diag 3845#*323#
2 Seleccionar modo MTP o modo SOFTWARE para que instale los drivers
3 Seleccionar puerto LGE Serial Port
4 Click UNLOCK y seleccionar modo Qualcom (No Root)
5 Se reinicia dos veces y listo.

Pequeño aporte por si alguien lo necesita flashear firmware de este modelo ya que no podia ni con lg-flashtool ni con LG 2-3G Tool seleccionando el modelo correcto lo que hice fue seleccionar el modelo ms210 y flasheo sin problemas aquí dejo log de operación de estos casi no hay ya pero lo pongo por si les cae alguno como ami que hoy me cayo gracias

LG 2-3G Tool v9.53
supported models: 1562

Reading timeout, check cable
Error Code: ReadInfo,1,1
Elapsed: 2 secs. --> (v9.53)

Mode: Emergency
Model: MS210
Read info...
Laf Protocol: 01000001
Model name: LGMS323
Software verion: MS32310c
Android verion: 4.4.2
Target operator: MPCS
Target country: US
Chipset: msm8610
IMEI: 014250007482917
Elapsed: 4 secs. --> (v9.53)

Phone mode is DOWNLOAD
Start flashing.
Laf Protocol: 01000001
Open KDZ File : C:\Users\Luigi\Downloads\MS32310a 00\MS32310a_00.kdz
Checking file hash...
Model : LGMS323
SwVersion : MS32310a
BuildTime : 0000-00-00 00:00:00
Total Files : 35
Model name: LGMS323
Software verion: MS32310c
Android verion: 4.4.2
Target operator: MPCS
Target country: US
Chipset: msm8610
IMEI: 014250007482917
Laf cmd error: LAF_CMD_UNLINK fail[LAF_ERROR_FAILED].
Start direct download mode
Write "PrimaryGPT" partition #1 of 35
Write "modem" partition #2 of 35
Write "sbl1" partition #3 of 35
Write "rpm" partition #4 of 35
Write "tz" partition #5 of 35
Write "sdi" partition #6 of 35
Write "aboot" partition #7 of 35
Write "rpmb" partition #8 of 35
Write "tzb" partition #9 of 35
Write "abootb" partition #10 of 35
Write "persist" partition #11 of 35
Write "laf" partition #12 of 35
Write "boot" partition #13 of 35
Write "recovery" partition #14 of 35
Skip "rct" partition #15 of 35
Write "factory" partition #16 of 35
Write "sbl1b" partition #17 of 35
Write "system" partition #18 of 35
Write "system" partition #19 of 35
Write "system" partition #20 of 35
Write "system" partition #21 of 35
Write "system" partition #22 of 35
Write "system" partition #23 of 35
Write "system" partition #24 of 35
Write "system" partition #25 of 35
Write "system" partition #26 of 35
Write "system" partition #27 of 35
Write "system" partition #28 of 35
Write "system" partition #29 of 35
Write "system" partition #30 of 35
Write "system" partition #31 of 35
Write "system" partition #32 of 35
Write "system" partition #33 of 35
Write "system" partition #34 of 35
Write "BackupGPT" partition #35 of 35
Erase "rct" partition
Done.
Elapsed: 205 secs. --> (v9.53)

Mode: Normal
Model: WX_PROJE
Build version: Mar 9 201416:02:50Feb 12 201405:00:00WX_PROJE
SW Version: M8610B-AAAANAZM-1.0.6038
IMEI: 01425000748291-7
BlueTooth Address: 00:00:00:00:00:00
Phone Code: default
SPC: 000000
Elapsed: 1 secs. --> (v9.53)

Direct unlock
Working with security zone
Checking phone at COM4
Reboot phone
Phone detected!
Repair IMEI...
Search LG Modem port...
Detected LG Modem port at COM5
Reboot phone
Done
Elapsed: 47 secs. --> (v9.53)

 

[Fixel]

También sale con Octopus, y en la conexión USB me funcionó con la opción LG SOFTWARE porque con MTP nunca me quiso abrir el puerto LGE AndroidNet USB Serial Port que es el que se ocupa. Espero les sirva este dato.