Online
Hola amigos aqui les dejo la forma de quitar el FRP a un NUU_A3 con android 7.0 patch Nov 5,2017:
1. Abrir Furious OTSmart y selecionar el modelo 5049.
2. Con el cell apagado dar click en FRP RESET mientras presionas el VOL -.
3. Listo el telefono quedara sin FRP.
Dejo Log;
Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM14))
Preparing to start flash mode;
Preparing to open COM14
Connecting;
Downloading DA;
Initializing;
Rid: 6e503efa61f44c6dc22b79303755def8
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x4E030188 0x64726143 0xBBFD1220 0xBFC42253 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xB7000000 SIZE: 0x119F80000
Factory Reset Protection successfully removed !
Time needed - 00:00:00
Log file saved to: LOG_22_03_2018_17_06_37.txt
otra forma
Acabo de hacer uno con Nck dongle crack, muy simple, apagado sosteniendo siempre volumen - enchufando el usb y en 2segundos listo
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM25)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM26)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
1. Abrir Furious OTSmart y selecionar el modelo 5049.
2. Con el cell apagado dar click en FRP RESET mientras presionas el VOL -.
3. Listo el telefono quedara sin FRP.
Dejo Log;
Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM14))
Preparing to start flash mode;
Preparing to open COM14
Connecting;
Downloading DA;
Initializing;
Rid: 6e503efa61f44c6dc22b79303755def8
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x4E030188 0x64726143 0xBBFD1220 0xBFC42253 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xB7000000 SIZE: 0x119F80000
Factory Reset Protection successfully removed !
Time needed - 00:00:00
Log file saved to: LOG_22_03_2018_17_06_37.txt
otra forma
Acabo de hacer uno con Nck dongle crack, muy simple, apagado sosteniendo siempre volumen - enchufando el usb y en 2segundos listo
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM25)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM26)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
Debes estar registrado para ver imágenes adjuntar
