Repara Imei Lanix Lt510

[servergsm]

con la nckbox seleccionan procesador mt6735m y le dan en repair imei en modo flash (ojo modo flash NO meta), conectan cel apagado y en 5 segundos esta listo 100% tested

coneccion flash celular apagado.
sale de una en segundos
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010046373232 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM21)
Dumping data, wait.
Reading imei
IMEI[1]: 356310070748283
IMEI[2]: fffffffffffffff
Backup saved: C:\Users\Evo-PRO\Documents\Android_MTK\nvram_backup\FLASH_MODE_NVRAM_MT6735M_S00_356310070748283_fffffffffffffff_05_05_2017_16_
0_54.zip
Writing imei
IMEI[1] TO UPDATE: 3563100xxxxxxx
FORMAT EMMC FLASH : BEGIN: 0x6b00000 - LEN: 0x2000000
Wait untill phone will start charging.
All done.

con sigma en menos de 5 segundos en plataforma mtk


SigmaKey v.2.27.17
840638071 Sigma dongle 2.27, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2018-05-26 10:53:18 ---------
SigmaKey 2.27.17 MTK: Restablecimiento de IMEI
Huawei USB VCOM (Android) (COM87), Proveedor:: Huawei Inc., Versión de drivers:: 1.0.0.0, Fecha: 31/12/2013, USB\VID_0E8D&PID_2007&REV_????
Procesador Baseband: MT6735, E00
Versión: GR6753_65T_M0_HW
Firmware: MOLY.LR9.W1444.MD.LWTG.MP.V79.P33
IMEI: 354994080074087
Modelo del teléfono: Plat:ILIUM LT510_CLARO_PE_SW_01_V22Outer:End
Restablecimiento de IMEI: 354994********
Hecho
Reinicio del teléfono...