Welcome to Octoplus/Octopus Box LG Software version 2.9.9
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM109
Selected model: LMX210HM
Reading info...
Model ID: LM-X210RM
IMEI: 350000-00-00000-2
Android version: 7.1.2
Battery level: 30%
Trying to enable Diagnostics ports...
Found model LMX210RM: ÿd at port COM109
Fixing IMEI...
New IMEI: 350000-00-00000-2
Write security backup function doesn't work for this device with
latest firmware versions. If you'll encounter any problem during
Repair IMEI operation - you won't be able to restore the phone to
it's initial state, so proceed at your own risk.
Continue?
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "LMX210HM_353452091607420_11-03-2020_
14-28-12.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Reading security area...OK
Backup saved to "LMX210HM_353452091607420_11-03-2020_
14-41-02.SEC"
Writing security area...OK
Switching to Normal mode...
Please perform the following steps:
1. Disconnect cable
2. Put phone into Normal mode manually
3. Connect USB cable to then phone
4. Press "Ok" button
Trying to enable Diagnostics ports...Failed!
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging"
option
6. Connect the cable and check, whether ADB interface has
appeared in PC Device Manager.
Please perform the following steps:
1. Disconnect cable
2. Put phone into Normal mode manually
3. Connect USB cable to then phone
4. Press "Ok" button
Trying to enable Diagnostics ports...Failed!
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging"
option
6. Connect the cable and check, whether ADB interface has
appeared in PC Device Manager.OK
Diagnostics ports are enbled!
Switching to Serial Port...
Found model LMX210RM* ÿd at port COM109
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing QCN done!
IMEI successfully fixed!
Rebooting phone...
Performed by 2.9.9 Software version.
