Bueno compañeros estuve probando distintos metodos para lograr el root para hacer el ft y el parche a este S10+, llegue a la solucion
1. IMEI directo con chimera
2. Unlock Bootloader
3. root - seguir pasos de la imagen que esta adjunta
4. parchar con chimera
IMPORTANTE: seguir todos los pasos de la imagen. VERIFICAR SIEMPRE QUE NO ESTE EN PRENORMAL
EN MI CASO TUVE QUE PASARLO CON ESTA ROOM G975FXXU3ASH6
LOG
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G975F
Sales Code: BVO
Country Code: PERU
Timezone: America/Lima
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Thu Aug 22 15:55:18 KST 2019
PDA Version: G975FXXU3ASH6 [august 2019, rev6]
Phone Version: G975FXXU3ASH3 [august 2019, rev3]
CSC Version: G975FOXM3ASH3 [august 2019, rev3]
Product Code: PEO
HIDSw Version: G975FXXU3ASH6/G975FOXM3ASH3/G975FXXU3ASH3/G975FXXU3ASH6
Board Platform: EXYNOS5
Modem Platform: SHANNON5000
Serial Number: R28MXXX3W6L
Imei: 3XXXXXXXXXXXX
Unique Number: CE021932D12AD1473F7E
Connections: AT,MTP
Battery Status: 3.92V (57%)
Network Type: GSM
SIM Status: LOADED,ABSENT
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2019-08-01
Data Encryption State: encrypted
Preparing...
Checking root access.
The phone is rooted by: 20.1:MAGISKSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [11.10.19 22:27:38]
1. IMEI directo con chimera
2. Unlock Bootloader
3. root - seguir pasos de la imagen que esta adjunta
4. parchar con chimera
IMPORTANTE: seguir todos los pasos de la imagen. VERIFICAR SIEMPRE QUE NO ESTE EN PRENORMAL
EN MI CASO TUVE QUE PASARLO CON ESTA ROOM G975FXXU3ASH6
LOG
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G975F
Sales Code: BVO
Country Code: PERU
Timezone: America/Lima
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Thu Aug 22 15:55:18 KST 2019
PDA Version: G975FXXU3ASH6 [august 2019, rev6]
Phone Version: G975FXXU3ASH3 [august 2019, rev3]
CSC Version: G975FOXM3ASH3 [august 2019, rev3]
Product Code: PEO
HIDSw Version: G975FXXU3ASH6/G975FOXM3ASH3/G975FXXU3ASH3/G975FXXU3ASH6
Board Platform: EXYNOS5
Modem Platform: SHANNON5000
Serial Number: R28MXXX3W6L
Imei: 3XXXXXXXXXXXX
Unique Number: CE021932D12AD1473F7E
Connections: AT,MTP
Battery Status: 3.92V (57%)
Network Type: GSM
SIM Status: LOADED,ABSENT
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2019-08-01
Data Encryption State: encrypted
Preparing...
Checking root access.
The phone is rooted by: 20.1:MAGISKSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [11.10.19 22:27:38]
Archivos adjuntos
Debes estar registrado para ver la lista de archivos adjuntos.