Online
Selected model: TCL T607DL (TCL Ion V)
Operation: Unlock network
Software version: 6.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM115 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x4E376970, 0xC8883E8B, 0xDA107E06, 0x89D4DA65
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x150100445836384D420973E7D3E3693B
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DX68MB
EMMC_ID : 0x150100445836384D420973E7D3E3693B
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : T607DL
Product Name : T607DL
Product Device : Bora_TF
Product Board : boratf
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Sat Jul 22 07:15:31 CST 2023
Display ID : TP1A.220624.014
Security Patch : 2023-07-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : UHAR
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read OTP... OK
Patch data... already patched, skip
Unlock... OK [DF1_T2, DF2, GB1_FF, GB2, PTCH]
Write lock info... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Write security partition to phone... OK
Unlock bootloader done!
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Write security partition to phone... OK
Network Unlock done!
Operation: Unlock network
Software version: 6.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM115 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x4E376970, 0xC8883E8B, 0xDA107E06, 0x89D4DA65
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x150100445836384D420973E7D3E3693B
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DX68MB
EMMC_ID : 0x150100445836384D420973E7D3E3693B
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : T607DL
Product Name : T607DL
Product Device : Bora_TF
Product Board : boratf
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Sat Jul 22 07:15:31 CST 2023
Display ID : TP1A.220624.014
Security Patch : 2023-07-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : UHAR
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read OTP... OK
Patch data... already patched, skip
Unlock... OK [DF1_T2, DF2, GB1_FF, GB2, PTCH]
Write lock info... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Write security partition to phone... OK
Unlock bootloader done!
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Write security partition to phone... OK
Network Unlock done!
