unbrick trt-lx3 y7 prime umt qc fire

[UnlockMaster39]

Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM18)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 62001500
OPK_DATA : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D15110FD8B11688
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_023]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : unknown generic_a53_32 [generic_a53_32]
Brand : Huawei
Prod.Name : generic_a53_32
Software : System 5.1.0.78(1FP9), eng.jenkin.20190603.212024 [Mon Jun 3 21:20:24 CST 2019]
Android Ver. : 7.0
Patch Level : 2019-06-01
Writing [RPM.img] -> [RPM] ...Done
Writing [TZ.img] -> [TZ] ...Done
Writing [SBL1.img] -> [SBL1] ...Done
Writing [APDP.img] -> [APDP] ...Done
Writing [MSADP.img] -> [MSADP] ...Done
Writing [MODEM.img] -> [MODEM] ...Done
Writing [DSP.img] -> [DSP] ...Done
Writing [CMNLIB.img] -> [CMNLIB] ...Done
Writing [KEYMASTER.img] -> [KEYMASTER] ...Done
Writing [CMNLIB64.img] -> [CMNLIB64] ...Done
Writing [MDTP.img] -> [MDTP] ...Done
Writing [DEVCFG.img] -> [DEVCFG] ...Done
Writing [LKSECAPP.img] -> [LKSECAPP] ...Done
Writing [ABOOT.img] -> [ABOOT] ...Done
Writing [RECOVERY.img] -> [RECOVERY] ...Done
Writing [ERECOVERY.img] -> [ERECOVERY] ...Done
Writing [SYSTEM.img ] -> [SYSTEM]...Done
Writing [CACHE.img ] -> [CACHE]...Done
Writing [BOOT.img] -> [BOOT] ...Done
Writing [VENDOR.img ] -> [VENDOR]...Done
Writing [PRODUCT.img ] -> [PRODUCT]...Done
Writing [USERDATA.img ] -> [USERDATA]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK
Resetting FRP Lock......Done
Resetting device...Done
Operation Finished.
acabo de revivir uno que solo daba puerto 9008 pasos convertit el uptade.app a xml por qc fire hacer testpoint y listo

 

[Jdani3l852]

Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM18)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 62001500
OPK_DATA : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D15110FD8B11688
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_023]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : unknown generic_a53_32 [generic_a53_32]
Brand : Huawei
Prod.Name : generic_a53_32
Software : System 5.1.0.78(1FP9), eng.jenkin.20190603.212024 [Mon Jun 3 21:20:24 CST 2019]
Android Ver. : 7.0
Patch Level : 2019-06-01
Writing [RPM.img] -> [RPM] ...Done
Writing [TZ.img] -> [TZ] ...Done
Writing [SBL1.img] -> [SBL1] ...Done
Writing [APDP.img] -> [APDP] ...Done
Writing [MSADP.img] -> [MSADP] ...Done
Writing [MODEM.img] -> [MODEM] ...Done
Writing [DSP.img] -> [DSP] ...Done
Writing [CMNLIB.img] -> [CMNLIB] ...Done
Writing [KEYMASTER.img] -> [KEYMASTER] ...Done
Writing [CMNLIB64.img] -> [CMNLIB64] ...Done
Writing [MDTP.img] -> [MDTP] ...Done
Writing [DEVCFG.img] -> [DEVCFG] ...Done
Writing [LKSECAPP.img] -> [LKSECAPP] ...Done
Writing [ABOOT.img] -> [ABOOT] ...Done
Writing [RECOVERY.img] -> [RECOVERY] ...Done
Writing [ERECOVERY.img] -> [ERECOVERY] ...Done
Writing [SYSTEM.img ] -> [SYSTEM]...Done
Writing [CACHE.img ] -> [CACHE]...Done
Writing [BOOT.img] -> [BOOT] ...Done
Writing [VENDOR.img ] -> [VENDOR]...Done
Writing [PRODUCT.img ] -> [PRODUCT]...Done
Writing [USERDATA.img ] -> [USERDATA]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK
Resetting FRP Lock......Done
Resetting device...Done
Operation Finished.
acabo de revivir uno que solo daba puerto 9008 pasos convertit el uptade.app a xml por qc fire hacer testpoint y listo

Buena amigos me facilitarias en archivo para flashear trt-lx3 que usaste del umt tengo días buscando no tengo box solo lo ago como hobbit el teléfono es de mi sobrino e visto muchos archivos pero con muerte de boot update.app sd no soluciona nada si me pudieras ayudar telo agradecería

 

[Rehox]

Buena amigos me facilitarias en archivo para flashear trt-lx3 que usaste del umt tengo días buscando no tengo box solo lo ago como hobbit el teléfono es de mi sobrino e visto muchos archivos pero con muerte de boot update.app sd no soluciona nada si me pudieras ayudar telo agradecería

Recien inscrito, software de celulares es un hobbie, no tienes box..... Que es lo que quieres???????


Por aqui estamos en serio en esto, te recomiendo llevar el equipo a un taller especializado

 

[UnlockMaster39]

esto no es un foro para hobbie es un foro de aprendizaje las personas deben tener un cierto conocimiento en software para poder trabajar un equipo no es pasamelo y yo pruebo hay privilegios que debes ganarte no me suscribo y ya me lo das evita el spam y evita un ban

 

[Multi2j]

me podrias poayar con que version reviviste? he pasado ya dos con umt pero me da errores

 

[sofixcell]

"Si va a comentar, hágalo de manera significativa. Evite mensajes como 'gracias', 'me gusta' o palabras sin sentido. De lo contrario, podría ser baneado.

Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM18)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 62001500
OPK_DATA : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D15110FD8B11688
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_023]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : unknown generic_a53_32 [generic_a53_32]
Brand : Huawei
Prod.Name : generic_a53_32
Software : System 5.1.0.78(1FP9), eng.jenkin.20190603.212024 [Mon Jun 3 21:20:24 CST 2019]
Android Ver. : 7.0
Patch Level : 2019-06-01
Writing [RPM.img] -> [RPM] ...Done
Writing [TZ.img] -> [TZ] ...Done
Writing [SBL1.img] -> [SBL1] ...Done
Writing [APDP.img] -> [APDP] ...Done
Writing [MSADP.img] -> [MSADP] ...Done
Writing [MODEM.img] -> [MODEM] ...Done
Writing [DSP.img] -> [DSP] ...Done
Writing [CMNLIB.img] -> [CMNLIB] ...Done
Writing [KEYMASTER.img] -> [KEYMASTER] ...Done
Writing [CMNLIB64.img] -> [CMNLIB64] ...Done
Writing [MDTP.img] -> [MDTP] ...Done
Writing [DEVCFG.img] -> [DEVCFG] ...Done
Writing [LKSECAPP.img] -> [LKSECAPP] ...Done
Writing [ABOOT.img] -> [ABOOT] ...Done
Writing [RECOVERY.img] -> [RECOVERY] ...Done
Writing [ERECOVERY.img] -> [ERECOVERY] ...Done
Writing [SYSTEM.img ] -> [SYSTEM]...Done
Writing [CACHE.img ] -> [CACHE]...Done
Writing [BOOT.img] -> [BOOT] ...Done
Writing [VENDOR.img ] -> [VENDOR]...Done
Writing [PRODUCT.img ] -> [PRODUCT]...Done
Writing [USERDATA.img ] -> [USERDATA]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK
Resetting FRP Lock......Done
Resetting device...Done
Operation Finished.
acabo de revivir uno que solo daba puerto 9008 pasos convertit el uptade.app a xml por qc fire hacer testpoint y listo

Amigo me podrías ayudar con el firmware.