Online
3022g unlock ok con furious pack 2 elegir modelo 1060 (1)
precionando tecla send conectas el usb debes darle desbloqueo directo pues el codigo que da no le funciona
aporte actualizacion 2018 modelo:0t 3022g
CON LA NCK MODULO SPD
TENER INSTALADO LOS DRIVES
MARCAR EN LA NCK ALCATEL Y BUSCA EL MODELO 3022G Y SELECCIONAR REMOVE SIM LOCK
SE CONETA APAGADO EL CEL CON LA TECLA DE LLAMADA LA OPRIMES Y CONECTAS EL USB
ES EQUIPO QUEDA LIBERADO EN MENOS DE 2 MIN
NOTA SI NO TE ENCIENDE KITA LA BATERIA Y SE LA PONES
Y LISTO ACOBRAR BIEN
EXE: NckDongle Spreadtrum Module 0.5
SELECTED : OT-3022G
ACTION: Unlock.
SCENARIO: SC6531.
Start Detect phone.
Remove the battery and connect handset to PC via USB cable.
After long press boot key while inserting the battery.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM93)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6531
FlashId: GigaDevice: [0x800000]GD25LQ64B
Reading Flash Info, wait...
Flash Size: $800000 Sector Size: $8000
NVRAM Status: NV_MINVALID_SOK
Checking nvram, wait....
Model: 3022G-3AUFMX1! Where h
Using mode 1
Writing simlock, wait...
Write Done.
Backup saved: backup\spd_nvram_backup\OT-3022G_014227003562892_saved_nv_1.bin
Total Time: 00:00:17
Done.
precionando tecla send conectas el usb debes darle desbloqueo directo pues el codigo que da no le funciona
Código:
Searching phone;
For an successful connection do the following:
1. Remove battery and usb cable
2. Insert the usb cable in the phone
3. Keep pressed the boot key and insert the battery
Phone detected (@oem185.inf,%dvcdsc%;SCI USB2Serial)
Preparing to sync;
Port opened [COM109];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: (c)2014, FuriouSTeaM GSM DEVELOPEMENT
Chip type: 6531 FdlStat: 0001
Starting auth;
HW IMEI : 000000-00-000000-0
Memory [CS0]: 00C8:0060:0017 - SIZE : 00800000
Reading phone info;
PHONE INFO: 3022G-3ARGDO1
BT ADDR: FE:58:FC:7C:CB:3C
SW IMEI[0]: 014227-00-xxxxx-x
SW IMEI[1]: 352751-01-xxxxx-7
SW IMEI[2]: 358570-01-xxxxx-3
SW IMEI[3]: 910575-60-xxxxx-8
SIMLOCK FLAG: ON
FIXED NV BASE: 30640000
Reading NV;
NV saved to : NV_000000-00-000000-0_014227-00-xxxxx-x_65310001_12_01_2016_18_27_42.spd
IMEI: 014227-00-xxxxx-x UNLOCK CODE: 41163473
Re-programming;
NV programmed;
Done;
Phone unlocked; Remove battery and cable;
Log file saved to: LOG_12_01_2016_18_28_00.txt
Time needed - 00:00:35aporte actualizacion 2018 modelo:0t 3022g
CON LA NCK MODULO SPD
TENER INSTALADO LOS DRIVES
MARCAR EN LA NCK ALCATEL Y BUSCA EL MODELO 3022G Y SELECCIONAR REMOVE SIM LOCK
SE CONETA APAGADO EL CEL CON LA TECLA DE LLAMADA LA OPRIMES Y CONECTAS EL USB
ES EQUIPO QUEDA LIBERADO EN MENOS DE 2 MIN
NOTA SI NO TE ENCIENDE KITA LA BATERIA Y SE LA PONES
Y LISTO ACOBRAR BIEN
EXE: NckDongle Spreadtrum Module 0.5
SELECTED : OT-3022G
ACTION: Unlock.
SCENARIO: SC6531.
Start Detect phone.
Remove the battery and connect handset to PC via USB cable.
After long press boot key while inserting the battery.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM93)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6531
FlashId: GigaDevice: [0x800000]GD25LQ64B
Reading Flash Info, wait...
Flash Size: $800000 Sector Size: $8000
NVRAM Status: NV_MINVALID_SOK
Checking nvram, wait....
Model: 3022G-3AUFMX1! Where h
Using mode 1
Writing simlock, wait...
Write Done.
Backup saved: backup\spd_nvram_backup\OT-3022G_014227003562892_saved_nv_1.bin
Total Time: 00:00:17
Done.
Debes estar registrado para ver imágenes adjuntar
