Offline
para los que quieran liberar el Alcatel 5010s y no tengan alguna box como sigma aqui les dejo la solucion
1.- abrir el crack de nckDongle
2.- en la parte d phone setting seleccionar 0-By CPU & MT6580
3.- ir a la pestaña de unlocking y presionar el boton de Direct unlock
4.- y conectar el celular sin pila
eso es todo solo deben esperar a que termine el proceso tarda solo unos segundos
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: MT6580
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010046373232 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM9)
Block Size: 512
MODEL FROM PROINFO: 5010S-2AUFMX1
SECRO FROM PROINFO: X5E0OF01BS10
IMEI marker was found in nvram
Reading security, wait...
SIM[1]:
Block1(N): Unlocked (remain:5) Code : 32138707
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5) Code : 32138707
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
1.- abrir el crack de nckDongle
2.- en la parte d phone setting seleccionar 0-By CPU & MT6580
3.- ir a la pestaña de unlocking y presionar el boton de Direct unlock
4.- y conectar el celular sin pila
eso es todo solo deben esperar a que termine el proceso tarda solo unos segundos
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: MT6580
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010046373232 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM9)
Block Size: 512
MODEL FROM PROINFO: 5010S-2AUFMX1
SECRO FROM PROINFO: X5E0OF01BS10
IMEI marker was found in nvram
Reading security, wait...
SIM[1]:
Block1(N): Unlocked (remain:5) Code : 32138707
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5) Code : 32138707
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.