Offline
Saludos a todos
Unlock Alcatel OT-4034T Con NCK Android MTK 2.9.3
Con la Nck Android Mtk 2.9.3, Selecionaremos nuestro modelo, nos vamos a la pestaña
SimLock-Unlock, dejaremos el flash mode elegido y daremos a direct unlock
Conectaremos el equipo apagado via usb, y la box hara el resto en segundos.
Aqui Logs
Exe version: NCKBox AndroidMTK 2.9.3
Selected model: Alcatel OT-4034T
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM53)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: F40122426977696E20
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (58Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F40122426977696E20 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
High speed disabled by user, continue with this settings.
Phone have OTP partition.
MODEL FROM PROINFO: 4034T-2AAVDO1
SECRO FROM PROINFO: XAK0NK02BV00
OTP IMEI: 357cxcxxcxcxcxcx7587
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:0)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:0)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[3140]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.
Espero les sea de ayuda bendiciones a todos
Proban2 y funcionan2
Unlock Alcatel OT-4034T Con NCK Android MTK 2.9.3
Con la Nck Android Mtk 2.9.3, Selecionaremos nuestro modelo, nos vamos a la pestaña
SimLock-Unlock, dejaremos el flash mode elegido y daremos a direct unlock
Conectaremos el equipo apagado via usb, y la box hara el resto en segundos.
Aqui Logs
Exe version: NCKBox AndroidMTK 2.9.3
Selected model: Alcatel OT-4034T
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM53)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: F40122426977696E20
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (58Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F40122426977696E20 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
High speed disabled by user, continue with this settings.
Phone have OTP partition.
MODEL FROM PROINFO: 4034T-2AAVDO1
SECRO FROM PROINFO: XAK0NK02BV00
OTP IMEI: 357cxcxxcxcxcxcx7587
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:0)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:0)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[3140]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.
Espero les sea de ayuda bendiciones a todos
Proban2 y funcionan2
Última edición por un moderador:
