Unlock Frp A510m Binario 4

[servergsm]

despues de batallar en google y youtube y busar algun boot para este bit 4 y no pille nada a si que decidi usar esta box y salio de una
seguir las instrucciones de la box y sale

Bienvenido en Octoplus Box Samsung software versión 2.6.7
-----------------------------------------------------------------------------------
To connect SM-N900S phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM1
Modelo seleccionado: SM-A510M
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Leyendo data...
Checking operation...OK
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.7 Software version.

Debes estar registrado para ver imágenes adjuntar