Online
G950U T MOBILE Unlock bit 8 u8 bin8 Binary 8 binario 8 rev8 z3x
MODELO G950U T MOBILE
DESPUES DE PROBAR TODAS LAS ROM CON EL RESPECTIVO BINARIO NO TUVE EXITO, POR LO QUE CARGUE LA ROM DE OTRO DE MODELO G950U1
ABRI Z3X CON EL MODELO G950U1 Y CARGUE LA SIGUIENTE ROM G950U1UES8DTJ1_OYM8DTJ1 LA PUEDEN DESCARGAR DE LA BOX
DESPUES LE DI EN UNLOCK SERVER TMB Y ME PIDIO 6 CREDITOS Y OPERACION CORRECTA
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.
Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Unlock TMB via Server
Selected model: SM-G950U1
Selected port: COM6 SAMSUNG Mobile USB Serial Port
Software version: 42.11
Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950U1
Android version: 9
PDA version: G950U1UES8DTJ1
CSC version: G950U1OYM8DTJ1
Phone version: G950U1UES8DTJ1
Product code: SM2G950UZKATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: RF8K31D5LZV
IMEI: 353111092108669
HW version: REV1.0
RF cal date: 2018.03.11
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2020-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM6
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM13 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.42.11
MODELO G950U T MOBILE
DESPUES DE PROBAR TODAS LAS ROM CON EL RESPECTIVO BINARIO NO TUVE EXITO, POR LO QUE CARGUE LA ROM DE OTRO DE MODELO G950U1
ABRI Z3X CON EL MODELO G950U1 Y CARGUE LA SIGUIENTE ROM G950U1UES8DTJ1_OYM8DTJ1 LA PUEDEN DESCARGAR DE LA BOX
DESPUES LE DI EN UNLOCK SERVER TMB Y ME PIDIO 6 CREDITOS Y OPERACION CORRECTA
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.
Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Unlock TMB via Server
Selected model: SM-G950U1
Selected port: COM6 SAMSUNG Mobile USB Serial Port
Software version: 42.11
Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950U1
Android version: 9
PDA version: G950U1UES8DTJ1
CSC version: G950U1OYM8DTJ1
Phone version: G950U1UES8DTJ1
Product code: SM2G950UZKATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: RF8K31D5LZV
IMEI: 353111092108669
HW version: REV1.0
RF cal date: 2018.03.11
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2020-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM6
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM13 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.42.11
