Instala la aplicación
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Nota: This feature may not be available in some browsers.

  • ⚠ Queda Prohibido comentario que no aporten nada a los temas como por ejemplo me quedo full sin pegar registro ni nada o comentario que solo contaminan los tema haga comentario de interes comentario que encuentre que no tienen sentido comentario borrado⚡
  • ⚠️ frp cuenga google nvdata combination todo lo que necesites Hostingunlock firmware rom sboot ⚠️
  • ⚠️ Por favor leer el Reglamento para evitar sanciones e inconvenientes con la página⚠️
  • ⚠ No está permitido decir GRACIAS en los temas; no contamine los temas con gracias y gracias; si no hace toma en cuenta estas reglas, su cuenta será suspendida por un mes.⚠️
  • ⚠️ si quiere descargar alguna archivo leea la seccion de tutoriales⚠️

🔐 Frp Cuenta Google Unlock Huaweı Y9 Prime 2019 Stk-Lx3 con Octoplus Huawei

Guías y métodos para eliminar o desbloquear la cuenta Google (FRP) en dispositivos Android. Incluye procesos manuales, herramientas y soluciones con caja o box.
Admin

servergsm

🏆Gran Maestro
Staff Miembro
Administrador
Moderador
Usuario VIP2
97%
En línea
Marca 📱
Huawei
Modelo 🔖
HUAWEI Y9 Prime 2019 STK-LX3
📱 Android / Sistema operativo
Android
Tipo de falla / servicio 🛠️
FRP / Desbloqueos (cuentas, IMEI, red)
🔧Herramienta utilizada
octoplus | Octoplus
Estado del equipo 📋
"Unlock / Desbloqueo de Red"
¿Problema resuelto?
si | ✅ Resuelto
HUAWEI Y9 Prime 2019 STK-LX3 Unlock Liberar con Octoplus Huawei

se necesita test point

image-png.25682

en octoplus Selecionar STK-LX3 click en direct unlock ojo tienes que tener los driver huawei istalado
Debes estar registrado para ver imágenes adjuntar
Código:
Welcome to Octoplus Huawei Software v.‪1.3.5.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM5 USB Serial Port

Job ID: 0000000002752C4B
2026-05-19 22:28:22
Starting Direct Unlock
Selected phone model: ‪STK-LX3‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: FKTVB20921006056
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪STK-LX3‬
System: ‪STK-L03DV 10.0.0.494(C605E7R1P1)‬
Android Version: ‪10‬
Base Version: ‪STK-LGRP6-OVS 10.0.0.494‬
Custom Version: ‪STK-L03DV-CUST 10.0.0.7(C605)‬
Preload Version: ‪STK-L03DV-PRELOAD 10.0.0.1(C605R1)‬
C_Version: ‪C605‬
D_Version: ‪D1‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪STK-LX3‬
System: ‪STK-L03DV 10.0.0.494(C605E7R1P1)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...
Direct Unlock done.
Performed by ‪1.3.5.5‬ Software version.
 

Archivos adjuntos

Debes estar registrado para ver la lista de archivos adjuntos.

Crea una cuenta o inicia sesión para comentar

Debes ser miembro para poder dejar un comentario.

Crear una cuenta

Crea una cuenta en nuestra comunidad. ¡Es muy fácil!

Acceso

¿Ya tienes una cuenta? Inicia sesión aquí.

Usuarios que están viendo este hilo.

Atrás
Arriba