Admin
Desconectado
- Marca 📱
- Huawei
- Modelo 🔖
- HUAWEI Y9 Prime 2019 STK-LX3
- 📱 Android / Sistema operativo
- Android
- Tipo de falla / servicio 🛠️
- FRP / Desbloqueos (cuentas, IMEI, red)
- 🔧Herramienta utilizada
- octoplus | Octoplus
- Estado del equipo 📋
- "Unlock / Desbloqueo de Red"
- ¿Problema resuelto?
- si | ✅ Resuelto
HUAWEI Y9 Prime 2019 STK-LX3 Unlock Liberar con Octoplus Huawei
se necesita test point
en octoplus Selecionar STK-LX3 click en direct unlock ojo tienes que tener los driver huawei istalado
se necesita test point
en octoplus Selecionar STK-LX3 click en direct unlock ojo tienes que tener los driver huawei istalado
Debes estar registrado para ver imágenes adjuntar
Código:
Welcome to Octoplus Huawei Software v.1.3.5.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM5 USB Serial Port
Job ID: 0000000002752C4B
2026-05-19 22:28:22
Starting Direct Unlock
Selected phone model: STK-LX3
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: FKTVB20921006056
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: STK-LX3
System: STK-L03DV 10.0.0.494(C605E7R1P1)
Android Version: 10
Base Version: STK-LGRP6-OVS 10.0.0.494
Custom Version: STK-L03DV-CUST 10.0.0.7(C605)
Preload Version: STK-L03DV-PRELOAD 10.0.0.1(C605R1)
C_Version: C605
D_Version: D1
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: STK-LX3
System: STK-L03DV 10.0.0.494(C605E7R1P1)
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...
Direct Unlock done.
Performed by 1.3.5.5 Software version.
Archivos adjuntos
Debes estar registrado para ver la lista de archivos adjuntos.