Offline
Welcome to Octoplus/Octopus Box LG Software version 3.0.7.08
Card S/N : 0xxxxxxxxxxxx
Performed by 3.0.7.08 Software version.
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000xxxxxxxxx
Checking data...OK
Platform: LG MTK
Selected port: COM78
Selected baudrate: 921600
Selected model: K500MM
Please, disconnect cable, power phone OFF, connect P999 cable
(with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and
connect USB cable.
Phone found at port COM162
Mode: Emergency
Initializing flash...OK
Model ID: LM-K500MM
Platform: mt6765
Android version: 10
SW version: LMK500MMAT-02-V10k-310-160-OCT-14-2020-
ARB00+0
LAF Version: 1.1
Product ID: VP01S200515003322
IMEI: 35xxxxxxxxxxxxx
Target operator: LAO
Hardware: rev_10
Battery level: 98%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 3545xxxxxxxxxxxxxxxx
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with
latest firmware versions. If you'll encounter any problem during
Unlock operation - you won't be able to restore the phone to it's
initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "K500MM_354xxxxxxxxxxx3_16-12-2020_15-
10-07.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: ixxxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was
completed, then please, don't reflash your device, first contact with
Support via Skype or create thread at forum!
Performed by 3.0.7.08 Software version.
Card S/N : 0xxxxxxxxxxxx
Performed by 3.0.7.08 Software version.
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000xxxxxxxxx
Checking data...OK
Platform: LG MTK
Selected port: COM78
Selected baudrate: 921600
Selected model: K500MM
Please, disconnect cable, power phone OFF, connect P999 cable
(with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and
connect USB cable.
Phone found at port COM162
Mode: Emergency
Initializing flash...OK
Model ID: LM-K500MM
Platform: mt6765
Android version: 10
SW version: LMK500MMAT-02-V10k-310-160-OCT-14-2020-
ARB00+0
LAF Version: 1.1
Product ID: VP01S200515003322
IMEI: 35xxxxxxxxxxxxx
Target operator: LAO
Hardware: rev_10
Battery level: 98%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 3545xxxxxxxxxxxxxxxx
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with
latest firmware versions. If you'll encounter any problem during
Unlock operation - you won't be able to restore the phone to it's
initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "K500MM_354xxxxxxxxxxx3_16-12-2020_15-
10-07.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: ixxxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was
completed, then please, don't reflash your device, first contact with
Support via Skype or create thread at forum!
Performed by 3.0.7.08 Software version.
