Debes estar registrado para ver imágenes adjuntas
Welcome to Octoplus/Octopus Box LG Software version 3.1.1
Card S/N : 000xxxxx
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000xxxxxxx
Checking data...OK
Platform: LG MTK
Selected port: COM78
Selected baudrate: 921600
Selected model: X120EMW
Connecting to phone...
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM7
Mode: Emergency
Initializing flash...OK
Model ID: LM-X120EMW
Platform: mt6739
Code name:
Android version: 9
SW version: LMX120EMWAT-64-V10f-EEA-XX-JUN-17-2019+0
LAF Version: 1.1
Product ID: WI23S191005007823
IMEI: 3562xxxxxxxxxxxx
Target operator: LAO
Hardware: rev_10
Battery level: 51%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI A: 356xxxxxxxxxxxxxx
IMEI B: 356xxxxxxxxxxxxxx
Bluetooth address: 98:B8:BA:CA:68:11
Wi-Fi MAC address: 98:B8:BA:3F
D:EA
SPC: 000000
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.
Continue?
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: ixxxxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Reading security area...OK
Backup saved to "X120EMW_356xxxxxxxxxx_13-04-2021_13-47-06.EEP"
Unlocking...OK
Writing security area...
Connecting to phone...
Initializing flash...OK
Writing security area...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Connecting to phone...
Initializing flash...OK
Removing write protection...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Connecting to phone...
Initializing flash...OK
Erasing part 2...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Connecting to phone...
Initializing flash...OK
Restore write protection...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.1.1 Software version.