Unlock Lg X210cmr

[servergsm]

Buenas, aquí para liberar el LG Risio 3 (LG X210CMR)

Con la octopus podras ver que el modelo no existe aun, pero ya me dicen los del equipo de octopus que en la siguiente actualización si saldrá.

mientras tanto, pueden usar el modelo M154 (Risio 2) y les funciona perfecto.
No daña seguridad, ni imei, ni wifi ni datos, ni apn nada. Todo perfecto.

Escogiendo modelo M154

Welcome to Octoplus/Octopus Box LG Software version 2.8.8

--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM243
Selected model: M154
Reading info...
Model ID: LM-X210CMRX210CMR10d
IMEI: 354704-09-055836-1
Android version: 7.1.2
Battery level: 46%
SW Version: X210CMR10d
Mode: Normal
Firmware compiled date: Dec 21 2017
Firmware compiled time: 05:00:00
Firmware released date: Feb 7 2018
Firmware released time: 12:26:32
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
IMEI: 354704-09-055836-1
Bluetooth address: 084:6A:34:2A:62
Wi-Fi MAC address: 48:60:5F:9C:CF:2A
SPC: 000000
Unlocking...
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "M154_354704090558361_25-08-2018_17-49-37.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...OK
Reading security area...OK
Backup saved to "M154_354704090558361_25-08-2018_17-57-09.SEC"
Writing security area...OK
Switching to Normal mode...
Trying to enable Diagnostics ports...Failed!
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.OK
Diagnostics ports are enbled!
Switching to Serial Port...
Found model LMX210CM* ÿh at port COM247
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing QCN done!
Phone successfully unlocked!
Rebooting phone...
Performed by 2.8.8 Software version.