Unlock Moto E4 Xt1764 Y Unlock Moto E4 Plus

[servergsm]

Buenas tardes, generalmente este modelo lo saco
directo con NCK selecionando el procesador MT6737M
y conectando apagado, pero van 2 que me llegan que marcan error
y encontre una forma rapida de hacerlo

igual con NCK van a la pestaña Unlock
en Phone settings seleccionan motorola y el modelo xt1756
para evitar daños, solo di lectura de codigo y me los dio instantaneo,
les dejo un log y si a alguno les saco del apuro no me molestan las gracias :v

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.8
Selected model: XT1756
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM31)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
-Reading GPT Drive OK
IMEI[1]: 35564008298xxxx
IMEI[2]: 35564008298xxxx
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:100) Code : 0605413458063260
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:100) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.