Offline
Saludos a todos
Unlock Q730mm Stylo 6 MetroPcs Octoplus
Logs
Welcome to Octoplus/Octopus Box LG Software version 3.0.7.08
Card S/N : 000107906E
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 00000000004E9628
Checking data...OK
Platform: LG MTK
Selected port: COM10
Selected baudrate: 921600
Selected model: Q730MM
Please, disconnect cable, power phone OFF, connect P999 cable
(with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and
connect USB cable.
Phone found at port COM31
Mode: Emergency
Initializing flash...OK
Model ID: LM-Q730MM
Platform: mt6765
Android version: 10
SW version: LMQ730MMAT-02-V10l-310-160-SEP-08-2020-ARB00
+0
LAF Version: 1.1
Product ID: VH03S201102001788
IMEI: 354xcxvxvxcvcvxvxvx359-6
Target operator: LAO
Hardware: rev_11
Battery level: 51%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 354vcvcvccxcxcxc59-6
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with
latest firmware versions. If you'll encounter any problem during
Unlock operation - you won't be able to restore the phone to it's
initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "Q730MM_354cxxxcxcxcxcx96_23-12-2020_10-
05-57.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: celcxcssa
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 210 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was
completed, then please, don't reflash your device, first contact with
Support via Skype or create thread at forum!
Performed by 3.0.7.08 Software version.
Espero les sea de utilidad bendiciones a todos
Proban2 y funcionan2
Unlock Q730mm Stylo 6 MetroPcs Octoplus
Logs
Welcome to Octoplus/Octopus Box LG Software version 3.0.7.08
Card S/N : 000107906E
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 00000000004E9628
Checking data...OK
Platform: LG MTK
Selected port: COM10
Selected baudrate: 921600
Selected model: Q730MM
Please, disconnect cable, power phone OFF, connect P999 cable
(with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and
connect USB cable.
Phone found at port COM31
Mode: Emergency
Initializing flash...OK
Model ID: LM-Q730MM
Platform: mt6765
Android version: 10
SW version: LMQ730MMAT-02-V10l-310-160-SEP-08-2020-ARB00
+0
LAF Version: 1.1
Product ID: VH03S201102001788
IMEI: 354xcxvxvxcvcvxvxvx359-6
Target operator: LAO
Hardware: rev_11
Battery level: 51%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 354vcvcvccxcxcxc59-6
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with
latest firmware versions. If you'll encounter any problem during
Unlock operation - you won't be able to restore the phone to it's
initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "Q730MM_354cxxxcxcxcxcx96_23-12-2020_10-
05-57.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: celcxcssa
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 210 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was
completed, then please, don't reflash your device, first contact with
Support via Skype or create thread at forum!
Performed by 3.0.7.08 Software version.
Espero les sea de utilidad bendiciones a todos
Proban2 y funcionan2
