🔓Unlock/Liberar UNLOCK SIM NUU N21 N6504L con Pandora

[michaelcell]

Marca 📱

Otras Marcas

Modelo 🔖

NUU N21 N6504L

📱 Android / Sistema operativo

Android 14

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

pandora | Pandora Box

Estado del equipo 📋

"Unlock / Desbloqueo de Red"

¿Problema resuelto?

si | ✅ Resuelto

Debes estar registrado para ver imágenes adjuntar

Selected model: Mediatek Mediatek
Operation: Unlock network
Software version: 9.15
Work ID: 106716556

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM22 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x3988294F, 0x60AED044, 0xFD9CEF8A, 0x6410A64D
Get Chip ID... [MT6761]
Get SOC ID... [8597A787CB743DDBA364154ECEB4AC21600B115F61732788E720AF63C686321B]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100525831424D42075600280375AD
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RX1BMB
EMMC_ID : 0x150100525831424D42075600280375AD
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : NUU
Product Manufacturer : NUU
Product Model : N6504L
Product Name : N6504L
Product Device : N6504LA
Product Board : NUU
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Sun Sep 28 11:12:32 CST 2025
Display ID : N6504L-DH-UGO-MV03203-05
Security Patch : 2025-09-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 1758977938
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

Selected model: Mediatek Mediatek
Operation: Unlock network
Software version: 9.25

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM56 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM56 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x5F56654A, 0xA8BD93F6, 0x1D1876C4, 0xC6087625
Get Chip ID... [MT6761]
Get SOC ID... [66BBB4A5A8C0093F2EE841CD5D1D7578169DC61A753868243ECCCA91269291F1]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x1501004758364241420618804B11A123
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: GX6BAB
   EMMC_ID   : 0x1501004758364241420618804B11A123
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0000400000 (4.00Mb)
   EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
   INT_SRAM: 0x000003A500 (233.25Kb)
   EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  0% - 10% device life time used
   DeviceLifeTimeEstB:  0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [B]
Read product info... [EXT4] ... OK
Product Brand        : NUU
Product Manufacturer : NUU
Product Model        : N6504L
Product Name         : N6504L
Product Device       : N6504LA
Product Board        : NUU
Board Platform       : mt6761
Build ID             : SP1A.210812.016
Build Date           : Fri Dec 19 14:08:06 CST 2025
Display ID           : N6504L-DH-UGO-MV03203-10
Security Patch       : 2025-12-05
Version SDK          : 34
Version Release      : 14
Version Codename     : REL
Firmware Version     : 1766124300
Userdata FS Type     : F2FS
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[alexxeg]

si es mtk me imagino que tambien se podra con unlocktook?

 

[servergsm]

si es mtk me imagino que tambien se podra con unlocktook?

para desbloqueo no de red