🔓Unlock/Liberar Unlock vortex muv 8.1.0 con nck y sigma

[servergsm]

Unlock
Vortex MUV. con Android 8.1.0
para este modelo Utilice NCK y Sigma, les digo como va el proceso.
para este modelo me daba error instalar el controlador correcto intentandolo solo con sigma. ya que el puerto que me daba eran 2
MediaTek ELT Port y Mediatek ETS Port.
y por mas que lo conectaba apagado solo quedaba en meta Mode pero con esos puertos.
procedi hacerlo con NCK y con boton apagado y medio error. pero no te que asi, si salia el Puerto que necesitaba. el cual era el Gadget CDC VCOM.
una vez que me lo detecto de esa manera y me marco error. est es el Log de NCK

Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[22]Detected: PreLoader USB VCOM Port (COM22)
\\?\usb#vid_0e8d&pid_2000#6&236cc9f3&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[64]META Port Detected: Gadget CDC VCOM Driver (COM64)
USB\VID_0E8D&PID_2007\6&236CC9F3&0&7
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6739,S01
[AP]APP_VER: alps-mp-o1.mp1
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R2.MP.V79.11
[META]HW_VER : TK_MD_BASIC_HW
Phone imei[1] : Error or not active[5]
Phone imei[2] : Error or not active[5]
Error get simlock handle!!
[0]All done.

Pero como notaran ya tengo el puerto Gadget CDC VCOM. lo que hice fue desconetar, conectar Sigma en MTK y seleccion el puerto antes mencionado.
le di liberacion directa y salio de una. aqui el Log de Sigma

Security area saved to "C:\Users\Cell Clinic\Documents\SigmaKey\security backup620671492\352508110012529_MT6739 TK_MD_BASIC_HW MOLY_LR12A_R2_MP_V79_11.skb"
If phone remains locked, please try Yoda method (via ADB mode).
Unlocking phone...Done
Restarting phone...Done
--------- 2019-12-09 11:13:42 ---------
SigmaKey 2.34.03 MTK: Direct unlock
Gadget CDC VCOM Driver (COM64), Provider: MediaTek Inc., Driver ver.: 2.0.0.0, Date: 2011-mm-23, USB\VID_0E8D&PID_2007&REV_????
Baseband Processor: MT6739
Version: TK_MD_BASIC_HW
Firmware: MOLY.LR12A.R2.MP.V79.11
IMEI 1: 352508110059132
IMEI 2: 135790246811222
Security area saved to "C:\Users\Cell Clinic\Documents\SigmaKey\security backup620671492\352508110059132_MT6739 TK_MD_BASIC_HW MOLY_LR12A_R2_MP_V79_11.skb"
If phone remains locked, please try Yoda method (via ADB mode).
Unlocking phone...Done
Restarting phone...Done

 

[enger100]

mucho proceso para algo tan sencillo. se hace con nck modulo spd facil.

abren modulo,volume menos y conectar cable,le dan a diag un la pestaña simlock ,al leer el diag le dan unlock y listo.


ACTION: Direct Unlock
Detecting phone, wait...
Using connection mode 1
Detected: SPRD U2S Diag (COM21)

Platform Version: MOCORTM_20A_W20.51.6_P1_Debug
Project Version: sharklp
BASE Version: 4G_MODEM_20A_W20.51.6_P1
HW Version: sc9832e_modem
12-29-2020 21:38:25
Build number: TAB8-user 11 RP1A.201005.001 20211215 release-keys
EMMC DDR SIZE :30.00 GB+2.00 GB
UID: 007ed3970abdd81e90b0b619c391b3bada2d23583047e23f5ecbf2c1d8ce61ba

IMEI 1: 867400020316612
IMEI 2: 867400020316620
IMEI 3: 867400020316638
IMEI 4: 867400020316646
BT: 98FC84C87B93
WIFI: 98FC84C7DE8B
Reading simlock backup, wait....
Saved to: C:\Users\CentralUnlockPC\Documents\spreadtrum_module\diag_nvram_backup\TAB8-user 11 RP1A.201005.001 20211215 release-keys_867400020316612__diag_simlock_nvram_backup.tar

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 41023778
Sim 2 Unlock Code: 41023788
Warning, this is factory key, some opperators can modify factory key.
Unlock is supported for this phone
Writing simlock...
Writing simlock ok
Done.